The program starts when you turn on the computer and turn it off. How to disable autorun programs in Windows

Unnecessary programs interfere with the user every time the computer starts. You have to wait and waste time, and sometimes they are simply not needed at all. I will provide instructions on how to disable them. This will significantly reduce the boot time of your computer.

Attention! Some programs may return to startup when you turn them on ( for example, utorrent).

To avoid this, you need to check their settings and remove autoloading.

You can see all the methods not only in the article, but also in the video. Everything is clearly demonstrated there. However, the article has some nuances.

Disable via Start menu

There is a special folder that contains files that run every time you turn on the computer. Typically, programs are added there themselves during installation if they are configured to do so. They may not be here, but it’s still worth checking.

Go to Start >> All Programs >> Startup. And delete the unnecessary ones by right-clicking and delete.

In this example, only skype is launched from this folder. Only the main programs located in this folder are displayed here. To disable others ( usually they are in the registry) it is better to use other methods.

Disabling startup in system configurations

All popular versions of Windows have a built-in utility for system management. Using it, you can simply disable autoloading by unchecking the boxes. Usually this is enough to solve this problem.

You need to open the command line. Go to Start >> Run ( Win+R) and enter msconfig as in the image below.

Select the “Startup” tab and uncheck unnecessary programs. My program and antivirus automatically load.

After this, you will be prompted to restart your computer. This can be done later. There is no way to remove absolutely everything. Only the most basic ones. If this is not enough for you, then see the following methods.

Disabling in CCleaner

Unlike the methods above, here you can disable autoloading for applications. First, download the free CCleaner program, install and launch. Select the "Tools" category and the startup tab. Turn off or remove unnecessary programs as shown in the image below. I only left the antivirus.

Disabling makes the startup task inactive, and deleting it completely removes it. However, programs can still add a task themselves even after using delete.

Disabling in the registry

Everything here is done by hand. If you don’t want to do it by hand, then move on to the next method. There it is done much easier.

In the execution line write regedit and navigate to the directory:

1. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

Then a list of startup tasks will appear. Each line will refer to a separate program. Remove the unnecessary ones as in the image below.

Take a closer look at the path:

1. HKEY_LOCAL_MACHINE - branch for all users.
2. HKEY_CURRENT_USER—The branch for the user you are on.

If this is not enough, then the following method should help.

Disabling using the autorun utility

The utility allows you to conveniently work with the registry and disable startup in just 1 click. Its capabilities include disabling not only programs, but also various dll libraries, system services, device drivers and, in general, everything that loads automatically. Download it and. No installation required.

Run the autoruns or autoruns64 file depending on your system version and accept the license agreement. Other files run it in the execution line.

Now its interface will appear in front of you. Here, select the “Everything” tab and simply uncheck unnecessary programs. All possible startup objects will be shown here.

Remove only what you know! Disabling important system libraries or services may cause your computer to become unstable.

After that, simply close the utility. There is no need to save anything. It will correct the values ​​in the registry itself immediately after adding or removing a checkmark. You won't have to do anything manually.

It also highlights lines in different colors:

1. Yellow - present in startup tasks, but no files were found. They will not be able to start automatically.
2. Red - files without description and without author. It could be viruses ( but that's not always the case).

Information about the file is displayed below. Weight, location and more. Individual tabs indicate the location of objects. You can tinker and turn off a lot of unnecessary and unnecessary things ( everyone is different). The main thing is to read about what you are disabling.

How many programs do you have in startup?

- This is the automatic launch of programs when you turn on the computer. Most often, this function is enabled independently when installing the program into the operating system. In some cases, autoloading can be a very useful feature. You can configure it yourself and leave only the necessary programs in startup. It is worth considering that with a large number of active programs in startup, the computer’s RAM is consumed in a larger volume, as a result of which the system startup may slow down significantly.

Why are programs added to startup?

We have already said above that installed utilities can independently add themselves to the startup registry. If necessary, the user can independently place any desired program into autorun, so that when the computer is turned on, the system automatically launches a frequently used utility.

Why clean the startup registry?

First of all, this manipulation should be performed if the computer system begins to “slow down” and loads very slowly. Thus, you can free up a significant amount of RAM, the presence of which is an integral criterion for the quality operation of your computer.

Startup may also contain extremely important programs that contribute to the correct operation of the operating system. Therefore, you should be extremely careful when cleaning the registry.

Disable in Windows 7

Read also: How to speed up Windows 10? TOP 6 Main ways to overclock an operating system

There are several answers to the question of how to disable startup programs in Windows 7. Each of them implies a separate removal method.

Method number 1. Uninstalling via the Start menu

Users who have been using this version of the operating system for quite some time have probably wondered, “What’s hidden in the Startup folder in the Start menu?”

More advanced users have long realized that using this folder you can disable autorun programs. To do this, open the Start menu, go to All Programs, then find the Startup folder and open it.

If there are no third-party programs in startup, when you open the folder, it will say “(empty).”

If third-party programs are present in startup, you can remove any of them yourself. To do this, right-click on the required program and select “Delete”, after which the item will go to the trash, from which it can be permanently deleted using the Shift+Delete key combination.

This method is the simplest, but in this case it is impossible to see all the programs that are in startup. Some of them are hiding.

If clearing this folder does not help eliminate unwanted automatic loading of programs when you start your computer, we recommend using one of the methods listed below.

Method number 2. Using MSConfig

Read also: [Instructions] “Service Host: Local System” loads the Windows 10 disk

This program is present by default in any version of the Windows operating system. There are 2 ways to call it.

In the first case, open the Start menu and enter “msconfig” (without quotes) in the search bar. After the system detects it, double-click LMB to launch it.

In an alternative launch version, you need to launch the command line by pressing the Win+R hotkey combination. In the window that appears, enter the command “msconfig” (without quotes) and click the “OK” button.

After launching the utility, a window will open in which you can remove programs from the startup registry.

To do this, go to the “Startup” tab, and then uncheck the boxes of the applications that you want to disable. After disabling unnecessary programs, click the “Apply” and “OK” buttons.

If you do not know what an application is responsible for, it is not recommended to disable it yourself, as you may disrupt the correct operation of the operating system.

After this, you will be prompted to restart your computer, automatically sent by the system. It is not necessary to restart your computer, so in this case the choice is yours.

When using this method, there is no need to install additional programs, since MSConfig is a standard pre-installed utility for all versions of the Windows operating system.

However, this method will not allow you to remove absolutely all programs and applications from autorun, so we advise you to consider the methods given below.

Method No. 3. Manual removal from the registry

Read also: [Instructions] How to reinstall Windows (7/8/10) on a computer or laptop | 2019

You can also launch the registry in two ways - through searching the Start menu or the command line.

In this case, you need to enter the command “regedit” (without quotes). After launch, the main registry window will open in front of you.

On the left side of the window there are two autorun partition folders - local and personal. For the first one the address is used:

And for the second:

Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

To clean the registry of unnecessary applications, we need to get to the final folder (“Run”), going through the “tree” of folders as indicated in the address.

To remove applications from startup, right-click on its name, and then select “Delete” in the context menu.

Cleaning is required in both sections.

In this case, we will use the program, which is freely available to all users on the official website. The utility is easy to use, takes up a small amount of memory on your hard drive, but at the same time, it is the best solution for cleaning startup. Download

On the developer's website, the program is provided only in English. We will tell you how to use it correctly without knowing foreign languages.

The program is downloaded in a ZIP format archive, which can be unzipped using any archiver (7zip, WinRar, etc.).

After you unzip the downloaded file, you will be presented with four shortcuts in the window in front of you. To install the program, we need the autoruns.exe file, which must be run as administrator.

When you first launch the application, you will be required to accept the license agreement by clicking the “Agree” button.

After this, the program window will open. This means that the utility does not require installation on the computer system.

By default, when launched, the application window will open the “Everything” tab. It presents all, without exception, programs and applications included in autorun.

For the convenience of users, there are also tabs in which applications are divided into categories (Winlog, Driver, Explorer, etc.).

To remove autorun, you need to uncheck the box next to the unnecessary application. If you select a line with a single left-click, then from the bottom of the window you can see information about the program that is in startup (version, size, path, etc.).

Method number 1. System partition

Read also: 3 Ways to disable “Sleep mode on Windows (Windows)” (7/8/10)

To go to the system partition, you first need to open the command line by pressing the Win+R hotkeys. In the window that opens, enter the command “shell:startup” (without quotes) and press the “OK” key.

The window that opens will display startup data for the current user.

To view startup registry data for all users, enter the command “shell:common startup” (without quotes) into the command line.

The window that opens will display startup applications for all users who have an account on this computer.

To disable startup, delete folders of unnecessary applications.

As you install new programs, your computer may slow down. One of the reasons is a large number of utilities in the startup list that take up device resources. Today we’ll look at what autoloading is, as well as how to optimize it so that resources are not wasted.

Autoload: what is this option and how is it useful?

The option to autorun programs implies opening utilities for further work in them immediately after turning on the computer, in particular, Windows OS. There is a list of startup programs. The user has the right to edit it himself: add and remove unnecessary utilities. The automatic mode for turning on applications will save you from searching for shortcuts on the “Desktop” in order to launch programs: you turned on your computer device and can immediately work in the desired utility.

In the Startup tab, you can edit the list of programs that should open when Windows starts

It is important to know that a considerable number of utilities in autostart negatively affect the performance of the operating system: utilities included in the list continue to function in the background after autostart and load the central processor. As a result, the device works slowly, especially if it has poor technical specifications.

Thus, it is not recommended to include many utilities in the list: no more than 7. Only antivirus will be a mandatory item. All other programs you choose yourself. For example, if you work constantly on the Internet, put your favorite browser in autoload.

How to disable autorun utilities in Windows 10 or remove unnecessary software from there

Autoloading is a useful option, but sometimes, as we noted above, users also encounter its disadvantages. Problems in this case may arise through no human fault: often during installation, utilities are automatically included in the startup list without the user’s knowledge, even if there is no need for this. As a result, even a new computer begins to freeze.

What to do in such a situation? You won't be able to turn off autoloading completely. In this case, only unnecessary programs are removed using any of the methods below, so that the list becomes much smaller.

Via "Task Manager"

In the Task Manager, you can not only end program processes, but also configure your startup list. What exactly needs to be done in this window?

1. In Windows 10, “Task Manager” can be quickly launched through the “Taskbar” (the bottom bar on the computer screen where icons of open programs and the “Start” button are located). Right-click on an icon-free field on the “Taskbar” and select “Task Manager” from the context menu.
   Select "Task Manager" from the "Taskbar" context menu
2. You can open this window in the classic way: hold down the key combination Ctrl + Shift + Delete and select “Task Manager” in the new screen.
3. The manager window will have several tabs. As you may have guessed, we need the “Startup” section.
   In Task Manager, switch to the Startup tab
4. Click on the column at the top “Status” to organize the list with utilities - it will be convenient to work with it.
   Click on the “Status” option to sort the list
5. Look at the apps that are included in startup. Find the ones you don't need. Select them one by one with the left mouse button, and then click on the “Disable” button located at the bottom of the window. If you want to deactivate all applications in this list, repeat the procedure for all items except the antivirus, as it should start working immediately after Windows starts.
   Select the program in the list with the left mouse button and click on the “Disable” button
6. Close Task Manager and restart your device.

Video: how to remove programs from the startup list using Task Manager

Using Registry Editor

You can set up a list of startup utilities not only through the familiar “Task Manager”, but also through a window called “Registry Editor”. Even beginners who previously did not know about the existence of this important built-in service can cope with this procedure. Let's look at everything step by step.

1. To make the Registry Editor window appear on the screen of your device, hold down two keys at the same time: Win (the button with the Windows icon) and R.
2. A small “Run” window will open. It will contain one line “Open”. Enter the regedit command here. Now click on OK or press Enter on the keyboard.
   Enter the command regedit in the "Open" field
3. Click on the left button “Yes” to allow the “Registry Editor” to make changes on this computer.
   Click "Yes" to allow Registry Editor to make changes to your device
4. The editor window is divided into two parts. We will look for the file folder we need in the left area, where the tree structure is located.
   The Registry Editor window is divided into two parts: sections and a list of files in folders
5. First, open the following sections one by one: HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run.
6. As a result, you will see a list of files that are responsible for the autostart of individual applications on the device. As a rule, the name of these files contains the name of the utility, so it will be easy to determine which items need to be deleted.
   Look in the list of registry entries in the Run folder for the names of unnecessary programs that should not run with Windows
7. To remove an application from the list, for example, ViStart or CCleaner, right-click on it to bring up a small menu with options. In it we already select “Delete”.
   Click on "Delete" to remove the registry entry
8. Click on “Yes” to confirm deleting the file from the registry. Don't worry: this will not lead to a system failure. You simply disable the utility from running.
   Confirm deleting the registry entry by clicking on “Yes”

Using the Startup folder on the system drive

The folder containing the list of startup programs is located on the system drive. In order not to search for it in Windows Explorer for a long time, we suggest using a quick method that will help you immediately display the desired section on the screen. So what to do:

1. On your keyboard, press and hold two keys for a couple of seconds: Win and R. The familiar “Run” window, with which we launched the “Registry Editor,” will open.
2. In the “Open” field we write the following: shell:startup. To avoid making a mistake in a command, it is better to copy it and then paste it into a line using the right-click context menu.
   Enter shell:startup in the Open field to launch the Startup folder.
3. As a result, Windows Explorer will launch, in particular the Startup folder.
   The Startup folder will contain a list of programs that start working when Windows starts
4. To remove an unnecessary application from the list, right-click on it to display a list of options. In it we already click on the “Delete” item, which is located towards the end.
   Select “Delete” in the context menu that appears to remove the program shortcut from the Startup folder

This method has a big disadvantage: not all applications that are in Autorun mode are displayed in this folder. Thus, you will not be able to fully edit the list of utilities.

Uninstall using Task Scheduler

You can optimize the list of utilities for autostart along with Windows startup using another built-in service of the operating system: “Task Scheduler”. How to open it and what needs to be done in its window?

1. Open the "Search" section on the "Taskbar". It will have a magnifying glass icon to the right of the Start button.
   Click on the magnifying glass icon to open Windows Search
2. If there is no such icon, enable it: right-click on the “Taskbar” and select “Search” in the context menu, and then select “Show search icon”.
   Select "Show search icon"
3. Enter the query “Task Scheduler” in the line. It will appear in the results immediately. Open it with the left mouse button. Enter the search term “Task Scheduler” in the line
4. In the service window, open “Task Scheduler Library”.
5. There will be a list in the middle part of the window. Find the unnecessary program in it. Left-click on it to highlight it, and then click on “Delete” or “Disable” in the right third part of the screen. Be careful, as here you can disable important processes from running.
   In the list of programs scheduled to run with Windows, disable unnecessary items

Installing special programs

You can clear the startup list not only using built-in Windows tools, but also using special software. Today we’ll look at two simple and effective utilities as examples: CCleaner and Autorun Organizer.

CCleaner: quickly and easily remove programs from startup

The CCleaner utility is a universal assistant for optimizing Windows performance from the developer Piriform. Its main function is to clean hard drives from “junk” files, which accumulate over time and begin to slow down the operation of the device. With this tool you can easily edit the list of startup programs. Use the following instructions to remove unnecessary utilities from the list:

1. Download the utility from the official website. Install the program following the simple prompts of the installation wizard.
   Click on the Download Free Version button to download the CCleaner installer
2. Launch the application using the shortcut on the Desktop.
3. Go to the "Tools" section, and then to the "Startup" tab. A list will appear in the Windows block with programs that open when the device starts.
   In the Startup tab there is a list of programs that start with Windows
4. Select the unnecessary utility in the list with the left mouse button. Then click on the blue “Turn Off” or “Delete” button. Repeat this step for each application you want to remove.
   Left-click on the unnecessary program and select “Turn off” or “Uninstall” on the right side of the screen

Video: how to disable startup programs using CCleaner

Autorun Organizer: an easy-to-use startup manager

Unlike CCleaner, this tool, developed by ChemTable Software, is only designed to manage the startup list. This is its main function: it does not clean disks. Nevertheless, the utility copes with its tasks efficiently: even if the program re-includes itself in the autorun list, Autorun will immediately disable it.

The downside of the utility is that during installation it is suggested to install additional software: Yandex.Browser and other related products from this company. However, you can refuse to install these programs by simply unchecking the boxes.

Now let's look at where you can download this startup manager from, as well as how to work in its window.

In the program itself

Often, utilities themselves include themselves back in the autorun list some time after you have removed them using any of the above methods (with the exception of Autorun Organizer, since the program strictly monitors this). To prevent them from being included in the list again, turn off the autoload option in the utility itself along with the OS. Typically, every program has a “Run automatically with Windows” option.

Let's look at the procedure using the example of one of the popular download managers and media players in one tool called MediaGet.

1. Open MediaGet from the shortcut on your Desktop or Start menu.
2. In the upper right corner, look for a small gear icon.
   Find the gear icon in the top right corner
3. Click on it to open the menu. Now click on “Settings” to open the settings section.
   Left-click on “Settings”
4. You will immediately be taken to the Main tab.
5. In this tab, in the “System” block, find the “Start with Windows” item.
   Find "Start with Windows"
6. Uncheck it to prevent the program from running in the background immediately after Windows starts.
   Uncheck "Start with Windows"
7. Left-click on the green OK button for the changes to take effect.

You can go into the settings of each program individually and turn off the option to run with Windows to completely remove them from the list.

If there are a lot of utilities you don’t need at startup along with Windows, you need to clean up the list: remove all programs that you don’t use, as they take up precious system resources on your computer. This can be done either using standard Windows tools or using special utilities, for example, CCleaner and Autorun Organizer. If you notice that a program is being re-added to the list, disable the “Run with Windows” option directly in its settings.

Good day, dear blog visitors. Today we will talk about how to disable startup programs on Windows 7. Because the more programs that open simultaneously with Windows, the slower the computer works.

Most users have noticed that the computer boots quickly after purchase, and after some time the loading time increases. Experienced owners explain this situation by saying that when installing new programs, games or utilities on a PC, additional components are automatically installed that make changes to the registry, and often to the startup registry.

It is in this situation that when you start the computer, some programs can automatically load in the background when you turn on the PC. Such actions can increase the load on RAM, which entails a long system load.

It is worth noting that with system autostart, not a large number of installed programs are opened, for example, launching an anti-virus program is necessary, since the utility checks the contents of the computer for the presence of viruses that could have come from the network, or the infection occurred from a flash drive or disk. Antivirus is very important and opening it will not greatly affect the startup time of windows.

However, if the start of the download is followed by the opening of additional programs, then such actions can increase the startup time by an order of magnitude. Most developers intentionally add data to the registry for installation, thereby promoting their programs.

It must be remembered that disabling all programs from startup is not advisable, since many programs work on security and data protection. The first thing you need to worry about is malicious utilities that leak into the system along with downloaded data or movies onto your computer from the Internet.

When viewing data, they are able to automatically download and install without creating shortcuts, this technique makes it very difficult to find a harmful file in order to delete it.

Quite often questions arise about how to get rid of such actions if opening programs are in the way and you don’t plan to use them.

Disabling programs in Windows 7 startup

There are several fairly simple ways to solve this problem.

• By using Msconfig;
• Cleaning with command CCleaner;
• Cleaning the registry Windows 7.

Command utility on Windows

Through this function you can view all the data that is used as startup programs. Such a program is launched using the “Start” command and the “Run” command.

After such simple steps, a whole list opens in front of the user that launches with instead of the system. Here you need to find out whether the program is malicious or simply interferes with the PC loading. If you have problems identifying the utility, you can use a special tab where information about the program and what it is responsible for will be available.

When performing such actions, you must clearly know which program you are removing from the download. It is very important to ensure that you do not disable anti-virus systems, since such an action can have a detrimental effect on the operation of the computer itself. Such programs completely protect your computer from malicious files.

Having selected the necessary (or rather, not necessary) utilities, uncheck the boxes next to their names and click “Ok”. After completing these steps, you should restart the computer to consolidate the work done, but this is not necessary.

To begin with, let's figure out what auto startup is, or, as it is also called, autoloading programs. This is a process that allows applications to load on their own after Windows is turned on and running. There are situations when you accidentally or out of necessity downloaded some program and you need it periodically, but there is no need for it to start every time after the operating system starts, and turning it off all the time is tedious. Also, an important advantage of disabling programs from autorun is that they will not eat up your RAM while being in constant action. In this article we will look at how to exclude programs from startup/autorun in Windows 7, Windows 8 and using additional universal utilities.

Disabling autorun in Windows 7

This method may already be familiar to you; if you have been using a computer for a long time, you could accidentally discover it yourself without any additional information, but for beginners the information may still be new.

Go to the Start menu > All Programs and find the Startup folder.

Everything that is there starts when the computer is turned on. To prevent these programs from running, simply remove them from there.

We use the standard Windows 7 utility - MSConfig

This utility, MSConfig, is already on your computer by default and you don’t need to install it, you just need to run it and use it.

And it’s very simple to launch it:

Open the Start menu again and type msconfig in the search bar.

It will be found immediately, all you have to do is click on its shortcut to launch it.

If for some reason you don’t have a search bar in the Start menu, you can simply press the Win+R key combination and the following window will open:

Enter msconfig there and click OK.

As a result, the msconfig utility should start. It looks like this:

Go directly to the Startup tab. By unchecking the boxes you will disable unnecessary programs. But if you don’t understand what each of them is responsible for, then it’s better not to disable it.

After you click OK, you will be prompted to restart your computer, but you don't have to.

This utility is very convenient, but it is also not functional enough, because... is not able to provide us with the ability to disable absolutely all (any) programs from startup.

So we'll look at a few more ways.

Manual removal from the Windows 7 registry

Launch the registry editor. To do this, press the usual key combination “Win ​​+ R” or again in the search bar in the “Start” menu we type the words “regedit”.

A very scary, incomprehensible window opens with many folders that look more like gobbledygook than names.

But we are not afraid, but calmly understand everything and gain knowledge!

Among these folders, in the distant wilds, there are two autorun sections of the “seven”:

general (local registry), which is used for all users, the address is:
Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

personal register - for the current user, at the following address:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

That is you need to go to the Run folder, expanding the folder tree one by one.

They contain files that run along with Windows and you can easily delete them as usual - by right-clicking and selecting “delete”.

You can first go to the first address, clean it there, and then start on the second.

Disabling autorun of programs using third-party software

Now we will talk about the third-party program Autoruns, which is distributed completely free of charge (freeware), but at the same time is very powerful and functional - in just a couple of clicks it can disable absolutely everything that can automatically start when you turn on the computer.

At the office The website has an English version, but we can easily understand it, even without knowledge of this foreign language.

The downloaded archive has a .zip extension and can be unpacked with any archiver.

There are 4 files in the folder. We are interested in “autoruns.exe”, which we launch.

When we first launch, we will be asked to accept the license agreement, which we will do by clicking on the “Agree” button.

The program looks like this:

We immediately see the “Everything” tab, which is a list of absolutely all startup objects.

But in order not to get lost there, there are tabs in which all this is broken down separately: Winlog, Drivers, Explorer, etc.

If you uncheck the box, we will disable autorun. If you click on a line, below you can see a description of the object: the version of the program, where it is located on the computer, size, etc.

In the “Logon” tab there is a list of programs that we could disable using the previous methods described in the article.

You may notice that some lines are highlighted in pink - these are simply objects that do not have a detailed description, and those whose files are deleted and can no longer be loaded, but are simply listed, are marked in yellow. Those. they may not be deleted.

Again, be careful when disabling something you know nothing about. Perhaps this is necessary for the main operation of Windows 7 and after disabling these services, the computer will not work as it should.

For the laziest we provide video tutorial of the whole process:

Disabling autorun in Windows 8

In Windows 8, unlike the earlier version of Windows 7, there is now a new column that will show you how much the program affects the performance of your computer.

Click on the line in the Impact on startup column in order to sort applications by download to the system and you can more easily analyze and disable unnecessary, more resource-intensive programs. After sorting the application, left-click on them and in the same window click on the “Disable” button.

Just as in the case of Windows 7, after disabling unnecessary programs, you will need to restart Windows.

Disabling autorun using special programs.

In this case we will use CCleaner. It is multifunctional and has proven itself well for a long time! Using it, you can not only set up startup on your computer, but also increase the performance of your PC, clean the OS registry, increase hard drive space and many other pleasant little things.

After downloading the CCleaner program, launch it from the shortcut on the desktop and in the left menu of the program, select the “Tools” menu, and then go to the “Startup” section.

Programs will be displayed as tabs; to disable them, just click on them and in the right menu of the program click on the “Turn off” button. Also, after all the startup cleaning procedures, it would be advisable to reboot the system.