LG SmartShare technology and SW DLNA program. Setting up DLNA (Smart Share) on your LG Smart TV. We watch movies and photos that are on the computer Screen share cannot connect the device

If you have a Samsung or LG Smart TV, you don't have to buy an Apple TV or other devices to stream your iPhone or iPad to your TV.

New applications Mirror for Samsung TV And Mirror for LG TV, developed AirBeamTV B.V., allow you to cast the contents of your iOS 11 device to your smart TV screen.

In this tutorial we'll show you how the Mirror for LG TV app works, but the Mirror for Samsung TV app should work in much the same way.

For the apps to work, your iPhone/iPad and Smart TV must be connected to the same Wi-Fi network. If so, then you can start.

How to Cast iPhone Screen to LG Smart TV

Once you connect both devices to the same Wi-Fi network, follow the steps below:

1) Download and install the Mirror for LG TV application from the App Store (cost RUR 379).

2) Open the application.

3) Wait until your TV appears in the list of available ones, and then click on its name.

4) If a window appears on the TV asking if you want to connect a device, use the remote control to press Accept/Allow.

5) The application will prompt you to add a screen recording icon to Control Center and enable access in applications. If you have these settings enabled, you can skip the corresponding steps.

6) Go to Settings → Control Center and turn it on Access in programs:

7) Then open the section Set up the element. management and add an icon Screen Recording.

8) Return to the Mirror for LG TV application and skip all the instructions by clicking on the button at the bottom of the screen:

9) You'll need to turn on Notifications so you can see when a device connects to and disconnects from your TV.

10) Once you complete all the steps, the app will redirect you to YouTube to test the feature. Find some video you want to watch on your TV.

11) Then open Control Center and tap on the Screen Recording icon using 3D Touch or just long press.

You should then be able to see the contents of your device on your TV screen with a slight lag.

How to end a broadcast

When you want to stop broadcasting, simply open Control Center and click on the Screen Recording icon.

A notification will appear at the top of the screen indicating that the broadcast has stopped. The TV will return to its normal state.

What you need to know

Although the application is very convenient, it has its own nuances that are worth knowing about. Firstly, it only supports Smart TVs from 2012 and newer. If you're not sure which TV you have, you can find the model on the back.

If you have a Samsung Smart TV, look at the letter in the middle of the model name (on the back of the TV).

E = 2012
F = 2013
H = 2014
J = 2015
K = 2016
M = 2017

For example:

UE55_E_S8000 = 2012
UE78_H_U8500L = 2014

If you have an LG Smart TV, it will be more difficult to recognize the model. The app developers recommend installing a free trial version of the app and checking if your TV is compatible with it.

Other nuances:

• The device must have iOS 11 or later installed.
• Broadcasting occurs with a lag of 1-3 seconds.
• Audio from Safari will not play on the TV, only on the device itself.
• You should only start broadcasting after you open the desired application, since switching between applications will disable it.
• Some applications block broadcasting. These include Netflix.
• Applications are only supported by Samsung and LG Smart TV. There is no support for other brands.

Results

The Mirror for Samsung TV and Mirror for LG TV apps can be useful if you have a Smart TV at home.

There are several ways to connect a mobile phone and a TV. Some options transform the smartphone into a real smart set-top box, while others, on the contrary, only allow you to play media content stored on the cellular device.

If you don't know how to connect your mobile phone to LG TV, then this article will be useful for you. Now let's get acquainted with the instructions for synchronizing mobile and television equipment. As a result, each user will be able to choose the option that suits him.

What does connecting your phone to TV do?

First of all, connecting your phone to a TV will significantly expand the functionality of your equipment. The smartphone is transformed into a kind of projector, since a signal is transmitted from it and the image is broadcast on a large screen. Thus, each user will be able to:

• play videos, view photos and open other media content from your phone, and then project it onto the big screen;
• launch video games, instant messengers and all sorts of other applications downloaded from the market;
• surf the Internet, that is, open various websites;
• conduct all kinds of presentations, demonstrations, read literature in electronic format.

Controlling your TV from your phone is a convenient and practical solution. However, if you plan to play games, then it is better to connect a joystick.

If the user connects via Wi-Fi, the image from the phone is transmitted over the air. In all other cases, it is necessary to use special cables and interfaces, which will be discussed further.

You can also download an application that will turn your smartphone into a remote control. This is very convenient, especially in cases where the old remote control is lost or broken. For LG TVs it is called LG TV Remote(link to Android Google Play, Apple AppStore).

Connecting via Wi-Fi Direct

This type of connection is suitable for owners of modern TV models that are equipped with a built-in Wi-Fi adapter and the Wi-Fi Direct function. For this type of connection, you do not need to be connected to a router. As a rule, via Wi-Fi you can only connect to a “smart” Smart TV. You also need to have Android 4.0 or higher installed on your mobile phone.

To connect your smartphone to your LG TV, follow these simple step-by-step instructions:

1. Take your smartphone, open the main menu, and then go to the “Settings” section. Go to the “Wireless Networks” subsection, and then select “Wi-Fi”. Click on the 3 dots at the top right and select "Wi-Fi Direct". If there is no such command, then select “Advanced settings”.

1. As a result, an automatic search for networks will be launched for subsequent connection using Wi-Fi Direct technology.

1. Take the remote control and open the main menu. Go to the "Network" section. As in the previous case, you need to click on the “Wi-Fi Direct” command.
2. A search will begin for devices available for synchronization. To connect your TV and smartphone, just select your mobile phone model from the list. A connection confirmation request will be sent to the device; you must approve it.

1. After a few seconds, the smartphone and TV are synchronized. The signal from the mobile will be broadcast on the big screen, and the sound will also be transmitted.

Main advantages:

• there is no need to run a wire across the entire room;
• no Wi-Fi router required;
• You can reproduce medical content in various formats;
• all connectors and inputs are free, so the phone can be charged;
• Internet surfing has been implemented.

Minuses:

• Old smartphones and TVs do not have Wi-Fi Direct technology;
• Your mobile phone battery drains quickly.

If the cell phone is connected to the TV via Wi-Fi, then the user will be able not only to play content, but also open applications - this is a big plus.

Via Wi-Fi using Miracast

We are talking about a modern data transmission standard, the essence is the use of wireless channels. If the TV supports this interface, then you will be able to broadcast various content to the big screen. You can also play games and run applications.

The main requirement is that the TV and smartphone must be connected to the same Wi-Fi network (router).

Instructions:

1. Turn on the TV and go to the main menu.
2. Open settings.
3. Go to the “Network” subsection.

1. Activate the Miracast option.

1. Take your smartphone and lower the shutter to start streaming.

Not all versions of the Android operating system support this functionality. The name of the function in question may vary depending on the device model, but the essence always remains the same. If you are unable to find this command, install an application from Google Play, for example, Miracast - Wifi Display. Launch it and activate the image transfer function.

Immediately after starting the Miracast function, an automatic search for devices available for connection will begin, select your TV. Then you need to confirm synchronization using the remote control. As a result, image transfer will begin. If the picture is not displayed on the entire screen, then simply turn the mobile phone over, i.e. it must be in a horizontal position.

Connection via HDMI

This method is considered the simplest. It is advisable that the mobile phone or tablet be equipped with a mini HDMI interface, which will provide a direct connection to the TV. However, this is very rare, so most likely the user will have to buy a special adapter.

How to connect a smartphone to LV TV? Follow the step-by-step algorithm:

1. One end of the cable must be inserted into the connector located on the back cover of the TV, and the other into the port on the smartphone. First, insert the adapter into the micro USB interface. Note the number of the HDMI port into which the cable was inserted.

1. Turn on the TV and go to the main menu, and then open the tab to select the signal source (or press the button on the remote control Input). You must select the HDMI input with the number into which the cable was inserted in the previous step. Usually it is the only one active and available for selection.

1. The picture will automatically adjust to the screen resolution. That is, this is done so that the image is displayed on the entire screen.

When the devices are connected by cable, the cell desktop will appear on the TV screen. Samsung, Huawei, Lenovo smartphones connect to the TV using an identical algorithm; there are certain differences in the iPhone setup process (a Lightning to HDMI adapter is required).

Strengths:

• you can ensure continuous operation of your cell phone by connecting a USB charger (if there is a direct mini HDMI output);
• the TV will work as a monitor, that is, the image is duplicated.

Flaws:

• not all smartphones support connection via HDMI;
• Often you have to buy an adapter.

A convenient and easiest way to synchronize your mobile device and TV.

USB connection

If you plan to connect a smartphone to the TV via USB, then remember that the mobile device will be used as a flash drive. This means that the screen will not be duplicated. You cannot play games or run applications. You can play individual files.

Lenovo, Huawei, LG, Samsung smartphones are connected using a similar algorithm:

1. Take a USB cord, which is included in the basic package of absolutely all mobile devices. Connect one end to the phone connector, and insert the other plug into the port located on the back of the TV.
2. Open the main menu on the TV and select the signal source - USB input. Sometimes you need to select the input with the number into which the cable was inserted.

When devices are paired, an interface opens where you can move and run files. In general, the interface is very similar to Windows Explorer. Control is carried out by remote control.

Some TV models automatically scan connected devices for media files and also prompt the user to play them.

Main advantages:

• versatility – absolutely all modern devices are equipped with a USB interface;
• there is no need to purchase additional cables, since the cord is included in the basic package of the mobile phone;
• During the operation of the device, it will automatically charge, extending the battery life of the device.

Screen Share from LG is a very convenient and useful program that every owner of a TV with a smart TV function can use. Using this software, the user can connect to his TV any device that supports this function, it can be a smartphone, a laptop or a tablet from any manufacturer. In the format of this review, we will look at options for connecting to Screen Share, the iPhone that is so popular these days.

fromLG: How to plugIphone

A technology called Miracast will greatly simplify the process of wirelessly connecting an iPhone to an LG TV. In the case of TV, Miracast provides us with access to Screen Share, plus this software is already installed on the smart TV initially. You will have to download the Twonky Beam program on your iPhone; this can be done in the standard Apple Store.

I think the download and installation itself will not cause any difficulties for users, after the process is completed, just launch Twonki Beam and check the box next to the Show or hide section. After this, the process of synchronizing devices will begin. If your iPhone cannot establish a connection to the TV, it is quite possible that the second one simply has outdated software, then you will need the help of an LG service center technician who will update the software and, if necessary, reflash the smart TV.

If everything went well, just select the videos you would like to broadcast on your TV and go to the additional menu. In the additional menu, select the name of your TV and click on “Beaming...”, after which the file will begin to be broadcast on the screen.

How to connectIphoneto the TVLG, alternative methods

Connecting to a TV using an HDMI cable will provide significantly better picture and sound, but will require some additional equipment. There are special adapters that have an HDMI port and analog connectors for the iPhone and charger. In addition to the adapter itself, you will also need an HDMI cable. You don’t have to configure anything at all, just switch the TV to the appropriate viewing mode and everything that happens on the gadget’s screen will be broadcast on TV.

You can also do without an adapter, in which case you will need an Apple TV set-top box. The set-top box must be plugged into the network and connected to the TV with the same HDMI cable. After that, go to the Apple TV settings and connect to the wireless network. We also connect the iPhone to the same network, after which the devices will be synchronized automatically. All that remains is to transfer the necessary video files and watch them on the big screen.

05/30/2019 at 18:27 (2 months ago)

Hello, please tell me if it’s not difficult
I bought a 50uk6410 a couple of days ago, the network from the router (D-Link DIR-300) to the PC goes via cable, to the TV via Wi-Fi (the TV is located behind a load-bearing wall from the computer and the router). The computer also has a TL-WN751ND network adapter installed (via PCI). At first I tried to use Display Share, a 4k movie with a volume of about 60 GB was played back normally, with the exception of some kind of inadequate sound lag, it felt like a second, which was then half eliminated by digging into the sound settings and turning on the “Bypass” function, but still a slight lag remained and caused discomfort. Then I decided to set up DLNA, and here everything is completely sad, there seems to be no sound lag, but it’s impossible to watch, it constantly loads.
Everything started up great through the external HDD.
Help me understand what hardware is used when using these functions: the computer's network adapter or the router? And will changing them (they are ancient) help in solving the problem? Anyone here play 4k movies via Display Share over Wi-Fi without audio lag? And what is the real speed of this so-called “LAN network” needed for playback without freezing, is it equal to dividing the volume of the film by its timing, that is, for a 60 GB film lasting 2 hours 60*1024*8/(2*60*60 )=68 Mbit/s

The problem with sound delay via Display Share was observed even when broadcasting a stream from Twitch in FullHD, although doing the same from a phone 2 meters from the TV there was no delay.
Thank you

05/30/2019 at 07:46 pm (2 months ago)

Hello. It is better to watch heavy films from USB drives. I cannot guarantee that such films will be played through any specific equipment without loading and sound delay. This is all very individual. Up to how well your TV catches the Wi-Fi network, what is the signal level. The connection speed greatly depends on this.

As for your equipment. Is the computer still connected via cable, or via Wi-Fi via TL-WN751ND? Or is everything still buggy? The D-Link DIR-300 router, of course, is very weak for such tasks. We need a more productive, gigabit one (with WAN/LAN port speeds up to 1 Gbit/s. D-Link DIR-300 has up to 100 Mbit/s) with support for the 5 GHz band. Well, if you connect your PC via Wi-Fi, then it needs a Wi-Fi adapter that supports the 5 GHz band. TL-WN751ND is very weak, its maximum speed is up to 150 Mbps. If via cable, then the computer must have a gigabit network card (perhaps one is installed there, if the computer is not very ancient).

The LG 50UK6410 TV supports Wi-Fi in the 5 GHz band and the 802.11ac standard. If you connect your TV and PC to the router in the 5 GHz band (according to the 802.11ac standard), the speed will be much higher. Well, or a PC via cable via a gigabit card.

But whether there will be stable Wi-Fi network coverage in the 5 GHz range near the TV is a question. Since coverage in this range is usually a little weaker compared to 2.4 GHz. This needs to be looked at on the spot. A lot depends on the distance and the wall (thickness, material).

Smartphones have begun to have many useful functions: from using the Internet and useful applications to a camera that is not inferior to the lens of a good camera. That is why there can be many reasons for connecting the phone display to the TV screen. But the essence of all the reasons is the same - displaying the display on a screen with a higher resolution.

Unfortunately, paradoxically, in this case, technological progress can slow down a person at the moment when he needs to use a function that has never been used before. Thus, due to the rapid updating of programs, phones and televisions, the methods of connecting to a particular screen often change; In addition, it often happens that the size of the media or wire does not fit the TV connector. But fortunately, there are quite a few connection methods: not only directly via wire, but also using other functions.

It became even easier to resolve the issue of connecting a phone when the Wi-Fi network became ubiquitous. Sometimes users do not even use the TV for its direct purpose, but only as a way to display information from another medium. With new technologies come new methods of interaction between gadgets, which include ways to connect the phone to various devices using the Direct function. However, this works mainly on the latest TV models.

Of course, a phone can be used instead of a flash card, but you shouldn’t limit your understanding of a smartphone’s capabilities. For now, a flash card can only act as a file carrier and by connecting to a TV you can view images or documents, and by connecting from a phone you can duplicate the entire display of the phone and thus you can play games or use phone applications on the big TV screen.

Basic connection methods

Connection methods exist both wired and wireless. If we look at all the existing possible ways to connect a phone to a TV, we can divide them into the following:

• Connecting your phone via HDMI connection.
• Connection via USB cable.
• Wireless connection via Smart Share.
• Wireless connection via AllShare.
• Connection via AirPlay.
• Connection via Wi-Fi.
• Connection via Screen Mirroring function.

Of course, synchronization conditions depend on the availability of a connection cable, TV and phone model, WI-FI network and installed applications.

How to connect your phone to TV via HDMI

An HDMI connection is the most common way to connect a phone to a TV, because almost any TV has an HDMI port with which you can connect any USB cable. For this type of connection, the phone must have a micro-HDMI connector, which may visually look similar to a USB port, but they are different connectors. The cord for such a connection must have an HDMI Type A connector on one side, and a micro-HDMI Tybe D connector on the other.

When connecting the cord to the connectors, both devices must be turned off. Once connected, you can turn on your phone and TV. Then in the TV menu you need to find and set the HDMI signal source. It often happens that a TV has several such connectors, but you need to choose the one to which the cord is connected. Next, you can select on your phone those functions that you want to display on the TV screen: photos, videos, applications, documents, etc. Sound and video images will also be transmitted.

It is worth remembering that not all applications can support the function of duplicating images on two device screens.

In standard mode, all settings are initially set automatically. However, it may also be that the picture is not displayed. Then most likely the problem is in the phone settings. To solve this problem, you need to go to the phone's options and settings and find the item that is responsible for the HDMI format. You can also select the frequency of updates in these settings.

If the phone somehow does not have a connector for an HDMI connection, then you can use an auxiliary tool in the form of a micro-USB-HDMI converter, which connects directly to the phone itself through the existing connector. You can then connect to your TV using a standard HDMI cable.

Connecting your phone to TV via USB

Through the USB cable, the TV can also access the memory and data on the phone. For this you need a suitable wire. To connect in this way, you must first connect the micro-usb connector to the phone, and the USB connector to the TV port. Sometimes a mobile device may request a connection type, for which you simply need to select the appropriate item in the “USB connection” selection menu. In order for the TV to start displaying the necessary files, you need to put the TV itself into metafile reading mode, the connection of which depends on the TV model. This could be: Multimedia function, USB connection, Home or Source functions. You must select either Multimedia or USB as the source for reading information. Next, you can select the type of file that you want to display.

After viewing the files and when you finish using the phone with the TV, the latter must be returned to its normal state, the mode it was in before connecting the phone.

With this connection method, the phone can be charged just like from a computer.

Connecting your phone to your TV via Smart Share

This Smart Share connection feature is also called DLNA settings. This is a so-called wireless connection that can transfer data wirelessly using installed applications. This feature is common on LG TVs. However, in order to use it, you must disable the supported HbbTV TV function, if any.

To connect your phone to the TV this way, you need to go into the settings of the phone itself and connect to the Wi-Fi network. Next, you need to select options or extensions for the selected network. In this parameters you need to find an option such as “Wi-Fi Direct”. After selecting this function, a list of suggested devices should appear, which should include this TV.

If you have problems with this connection, then first of all you need to check the operation of applications like HbbTV on the TV - it must be disabled.

Connecting your phone to your TV using the AllShare function

This function is suitable for Samsung phones and synchronizes gadgets with the TV. It is not necessary, of course, to have a phone from this particular company in order to connect in this way. It’s just that this function was originally built into Samsung, and also created for TVs that support a Smart TV receiver. However, if necessary or because this function is not available on your phone, you can install the All Share module.

To connect All Share, you need to make sure that your phone and TV are connected to your home WI-FI network. Then you need to go to the phone settings and in the “advanced settings” sub-item, find the “available devices” option and select “module exchange”. The All Share function should be in the list of available devices. After launch, you will need to create an account if you did not have one before.

If the TV has previously installed the SmartTV function, then using it in the menu of this function you can enter the Smart Hub module and then use the search to find the AllShare Play application. After installing this app, you must also create or sign in to an account on your TV.

Connecting your phone to your TV via AirPlay

The AirPlay function was created by Apple for technologies of the same name. This is the so-called application with which you can easily connect to any devices on the network from Apple phones. However, this connection has limitations: the picture from the phone on the TV screen can be displayed at the same scale. It is also worth keeping in mind that when playing dynamic images in the form of videos or games, the image may be transmitted with a delay. If you connect via AirPlay to AppleTV, then such problems will not arise.

This type of connection requires a wireless Internet network. To connect to AirPlay you need to download this application to your phone. Next, go into it and register an account if you don’t have one. To connect the TV to this system, you also need to download this application, but from the TV and do the same.

For later Apple phone models (above model 4), you can use the AirPlay Mirroring feature to conveniently scale the image from your phone display to your TV.

Connecting your phone to TV directly via Wi-Fi

If you don’t have a router or for some other reason, you can connect your phone to the TV via the Wi-Fi-Direct function directly. This function is located in the phone settings in the wireless networks section. On the TV, this function is also located in the settings, which can be accessed through the main screen and is called “WiFi Direct settings”. Next, through the TV remote control, you need to go to the settings, find the “Manual” function, go to “Other methods”. Then you can transfer data from your phone to your TV via Wi-Fi Direct.

If you cannot connect in this way and the standby mode for Wi-Fi Direct mode is displayed, then you need to press the “Options” button and “select manually”. If your device has WPS, then you need to select it and then follow the instructions.

Connecting your phone to your TV via Screen Mirroring

This connection method is ideal for owners of Samsung devices, since it was created for them. Using it, you can synchronize gadgets with a Samsung TV without any wires or additional installations. However, this function is not available on all TVs from this company, but only on Samsung F, J, K, M-series TV models. But this does not mean that it cannot be installed on other TV models from this manufacturer.

To connect to Screen Mirroring, you need to click “Source” on the menu panel of this TV, then on your phone you need to open the quick settings panel and in the “advanced settings” area find the “Smart View” option. Next, the phone can begin to search for this TV and then highlight the name of its model, which you need to click on. After which an image of the phone display will appear on the TV screen.

Ways to connect your phone to your TV: