Usb flash magna 32 gb restored program. Repairing a flash drive using programs. How to recover a file deleted from a flash drive

Today we will look at:

USB drives from Silicon Power have a simple and elegant design. By purchasing such a stylish product, we hope that the miniature storage media will last quite a long time.

It is very unpleasant when flash drives unexpectedly fail, while the drive contains valuable information that was not duplicated. According to customer reviews, 16 GB USB drives from Silicon Power are the most vulnerable to logical errors and physical influences. Don’t despair right away; in most cases, you can restore the performance of the storage device and save the information.

Signs that a USB device has failed and needs to be repaired or restored

• Flush is periodically or not detected at all.
• When turned on, it is detected as a connected device, but a message is displayed that it is not recognized by the operating system (unknown device).
• Inability to perform file access, read or write operations, and messages are displayed: “no access to the disk”, “disk is write protected”, “insert disk”, “file or folder is damaged. Reading is impossible."
• Defined as media with reduced or zero memory capacity.
• The message “Before you can use the disk in the G:\ drive, you must format it. Format?" After several tries, it turns out that "Windows cannot complete formatting."

Causes of malfunctions

• Logical – incorrect formatting, deleting and removing a device while recording, transferring or downloading information, incorrect use of a flash drive when watching movies on TV, file system failure.
• Mechanical - shocks, falls, etc.
• Thermal and electrical – static electricity discharges, power instability during power surges and overheating.
• Software and hardware malfunctions in the operation of electronic parts of flash drives.
• Damage or removal of the driver program for device recognition by the operating system.
• , written specifically to deliberately remove or distort information.

Solutions for restoring flash drives

When restoring the functionality of USB drives, it should be taken into account that in most cases this results in a complete loss of data recorded on them.

In case of serious logical errors in the file system, the knowledge of computer specialists is needed.

In case of mechanical, thermal and electrical impacts and destruction, the device is usually not suitable for use. However, if only the body of the flash drive is damaged, there is a possibility of recovering the information in service centers.

The “driver” program can be reinstalled by downloading it from the manufacturers’ official website using the link Silicon Power drivers.

As in the previous case, the program is launched without installation through the executable file “RecoveryTool (.exe)”. Screenshot of the start and scanning start screen:

Before scanning begins, a warning is displayed stating that while the program is running, there is a risk of losing data from the media. By clicking on Start, the process of restoring the flash drive begins.

SoftOrbits Flash Drive Recovery is a program for recovering information from flash drives after repeated formatting. You can download the trial version from the official website softorbits.com.

The program must first be installed. The launch is carried out through the executable file “frecover (.exe)”. The screenshots below show the process of starting the trial version of the program, where you select the media to scan, select files for recovery, hard drive space for recording them, as well as a preview window for the recovered information:

To obtain final recovery results, you must purchase a registered version of the program on the Softorbits website.

Controller firmware

If the use of the above software does not lead to the expected results, there is a more complex option for restoring flash media - this is the so-called “controller firmware”. This option consists of using special utilities to recover hardware failures of a specific type of flash drive using known unique USB device identifiers - VID and PID.

If you carefully examine the window of the running USB Flash Drive Recovery program described above, you can see that the VID and PID values ​​are automatically recognized during operation. If these numbers are entered into the database of identifiers of known flash drives on the Iflash website , It’s easy to find in the table the model of your flash drive from the manufacturer Silicon Power and a utility for restoring it (“flashing”).

Experiments along the way of using various options for restoring the functionality of your flash drive will definitely lead to the desired results and pleasant personal discoveries.

How to recover an SD card or USB flash drive if the computer does not see it, does not read or write data? Problems with flash drives are rarely caused by natural wear and tear. More often, problems with them are caused by users ignoring the rules for safely removing the device, experiments with various software in which these flash drives are involved, as well as their initially lousy quality. Below we will consider a list of possible actions carried out in the Windows environment that can solve the problem, unless, of course, the cause lies in a mechanical failure. And we, friends, will go from simple to complex.

Recovering SD cards and USB flash drives in Windows

• Note: below we will only talk about restoring the functionality of flash drives, but not about saving the data stored on them. This is a separate topic, and there is something about this on the website; you can also use this program for. Most of the methods proposed below for recovering SD cards and flash drives will lead to the loss of their data.

1. Hardware lock

SD cards, MicroSD adapters and flash drives can be hardware protected from writing data or completely blocked even for reading. On such devices there is a lock switch, which must, accordingly, be set to the “Unlocked” position.

2. Problems not related to the drives themselves

The cause of problems with SD cards and flash drives may be Windows security policy. You need to find out whether access to removable drives is blocked (in whole or in part of writing data to them) by the computer administrator. You also need to check the card reader or USB ports of your computer. If everything is fine with the latter - the card reader reads other SD cards, but problems still arise with the flash drive, no matter how you connect it to other USB ports, move on.

3. Windows Explorer

Standard formatting using Windows Explorer can help in simple cases such as unsuccessful writing of data to a flash drive. Or when for some reason a smartphone, tablet, camera or other device cannot cope with this operation regarding SD cards. In any current version of Windows, in the Explorer window on the drive, call up the context menu and click “Format”.

We leave the original file system and first try a quick format.

If it fails, repeat the operation, but with full formatting (uncheck the fast box).

4. Windows Disk Management

You can try to perform the formatting procedure in disk management. To launch this tool, enter in the system search field:

diskmgmt.msc

In the disk management window, focusing on the size of the drive, we look for it among the disks connected to the computer. And in the context menu called on it, we launch formatting.

You can immediately select full formatting.

If the flash drive has a partition structure like a hard drive, you must delete each of those partitions. This is done using the “Delete Volume” option in the context menu.

And then, in place of the resulting unallocated space, you need to create a single partition. To do this, in the context menu on this very unallocated space, launch the “Create a new volume” operation and follow the instructions of the step-by-step wizard.

5. Programs for low-level formatting

Standard formatting tools may not help in complex cases, for example, when flash drives are displayed (in the same Explorer or Disk Management) as unrecognized devices with the RAW file system. The latter means that either the Windows environment does not understand the file system of the drive, or there is no file system as such in principle. Actually, this is what causes problems with a flash drive or SD card when it works on other devices, with other operating systems. In such cases, third-party Windows programs designed for so-called low-level formatting will help restore the flash drive.

In fact, low-level formatting is a procedure that is carried out either in the production conditions of flash device manufacturers, or in serious specialized services. Various types of Windows software that claim to perform this kind of operation actually perform a regular full format, but using mechanisms that differ from those used by the operating system. Such programs cope well with flash drive problems if these problems arise at the file system level. Let's look at two of these programs.

HDD Low Level Format Tool

http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/

The shareware portable program HDD Low Level Format Tool can format various types of storage media, in particular SD cards and USB flash drives. After unpacking the archive with the program, run it and agree to the license terms.

We choose free use.

Directly in the program window we indicate the problematic drive and click “Continue”.

We confirm the decision.

We wait for the operation to complete and check the operation of the media.

SDFormatter

http://flashboot.ru/files/file/355

A completely free small program called SDFormatter is another tool for so-called low-level formatting. Works with both SD cards and USB flash drives. Install SDFormatter into the system, launch it, and indicate the problematic flash drive in the “Drive” column. Click “Format”.

The program wants to make sure that our intentions are serious, click “Ok.

He asks not to touch the drive while the operation is being performed.

Upon completion, test the flash drive or SD card. If this does not help, repeat the operation with the settings for complete overwriting of sectors (nothing more than full formatting). Press “Option”, select “Full (OverWrite)”. And also click “Format” at the bottom.

If using the above methods it was not possible to revive the flash drive, and it is still under warranty, you need to stop at this stage. And do not take any further action except contact the seller with a request to replace the device. All the actions described below should be resorted to only when, in fact, there is nothing to lose. The instructions below apply to USB flash drives, SD and MicroSD cards. However, in the case of the latter, the likelihood of recovery is extremely low.

6. D-Soft Flash Doctor

D-Soft Flash Doctor performs so-called low-level formatting, and at the same time also detects damaged sectors (cells). Well, and, accordingly, knows how to block them and replace them with backup ones. The program can help when flash drives or SD cards have difficulty reading individual files located on damaged sectors. The program is free and portable. I did not find the official website, but it can be freely downloaded on the Internet.

In the D-Soft Flash Doctor window, the first thing you need to do is run a scan to detect errors.

In my case, there were no damaged (broken) sectors.

But if in your case, friends, the scan results are different and bad sectors are detected, we start the recovery process.

The window for performing this operation promises that the process will not last longer than 10 minutes, but in fact, reassigning bad sectors on a drive with a capacity larger than 4 GB can take quite a long time. So it is better to run the recovery operation at night.

7. Flashing the memory controller

Programs for so-called low-level formatting or their analogues, which in any other form claim to be able to resuscitate all types of SD cards and/or USB flash drives, turn out to be powerless in the event of a software failure of the controller, when it requires flashing. This problem can have different symptoms, but more often it is either the computer does not see the drive completely, or it sees it and can even read the data, but cannot format it by any means. In particular, due to write protection even though the drive is not locked by hardware.

Various problems with USB drives or flash drives are something that probably every owner faces. The computer does not see the flash drive, files are not deleted or written, Windows writes that the disk is write-protected, the amount of memory is displayed incorrectly - this is not a complete list of such problems. Perhaps, if the computer simply does not detect the drive, this guide will also help you: (3 ways to solve the problem). If the flash drive is detected and works, but you need to restore files from it, first I recommend that you familiarize yourself with the material.

If various ways to fix USB drive errors by manipulating drivers, actions in Windows Disk Management or using the command line (diskpart, format, etc.) did not lead to a positive result, you can try utilities and programs for repairing flash drives provided by both manufacturers , for example, Kingston, Silicon Power and Transcend, and third-party developers.

On the official website of Silicon Power, in the “Support” section, a program for repairing flash drives from this manufacturer is presented - USB Flash Drive Recovery. To download, you will need to enter your email address (not verified), then the UFD_Recover_Tool ZIP archive is downloaded, which contains the SP Recovery Utility (requires .NET Framework 3.5 components for operation, will download automatically if necessary).

Similar to the previous program, SP Flash Drive Recovery requires an Internet connection to work and restoration of work occurs in several stages - determining the parameters of the USB drive, downloading and unpacking a suitable utility for it, then automatically performing the necessary actions.

You can download the program for repairing flash drives Silicon Power SP Flash Drive Recovery Software for free from the official website http://www.silicon-power.com/web/download-USBrecovery

If you are the owner of a Kingston DataTraveler HyperX 3.0 drive, then on the official Kingston website you can find a utility for repairing this line of flash drives, which will help format the drive and bring it to the condition it had when purchased.

You can download Kingston Format Utility for free from https://www.kingston.com/ru/support/technical/downloads/111247

ADATA USB Flash Drive Online Recovery

The manufacturer Adata also has its own utility that will help fix flash drive errors if you cannot read the contents of the flash drive, Windows reports that the disk is not formatted, or you see other errors related to the drive. To download the program, you will need to enter the serial number of the flash drive (so that exactly what is required is downloaded) as in the screenshot below.

After downloading, run the downloaded utility and follow a few simple steps to restore the operation of the USB device.

Official page where you can download ADATA USB Flash Drive Online Recovery and read about using the program - http://www.adata.com/ru/ss/usbdiy/

Apacer Repair Utility, Apacer Flash Drive Repair Tool

Several programs are available for Apacer flash drives - different versions of Apacer Repair Utility (which, however, cannot be found on the official website), as well as Apacer Flash Drive Repair Tool, available for download on the official pages of some of the Apacer flash drives (look specifically on the official website your USB drive model and look at the downloads section at the bottom of the page).

Apparently, the program performs one of two actions - simple formatting of the drive (Format item) or low-level formatting (Restore item).

Formatter Silicon Power

Formatter Silicon Power is a free utility for low-level formatting of flash drives, which, according to reviews (including in the comments to the current article), works for many other drives (but use it at your own peril and risk), allowing you to restore their functionality when no other methods don't help.

The utility is no longer available on the official SP website, so you will have to use Google to download it (I do not provide links to unofficial locations within this site) and do not forget to check the downloaded file, for example, on VirusTotal before launching it.

SD Memory Card Formatter for repairing and formatting SD, SDHC and SDXC memory cards (including Micro SD)

The SD Memory Card Manufacturers Association offers its own universal utility for formatting the corresponding memory cards if problems arise with them. Moreover, judging by the available information, it is compatible with almost all such drives.

The program itself is available in versions for Windows (Windows 10 is also supported) and MacOS and is quite easy to use (but you will need a card reader).

You can download SD Memory Card Formatter from the official website https://www.sdcard.org/downloads/formatter/

D-Soft Flash Doctor program

The free D-Soft Flash Doctor program is not tied to any specific manufacturer and, judging by reviews, can help fix problems with a flash drive through low-level formatting.

In addition, the program allows you to create an image of a flash drive for subsequent work not on a physical drive (to avoid further malfunctions) - this can be useful if you need to get data from a Flash drive. Unfortunately, the official website of the utility could not be found, but it is available on many resources with free programs.

How to find a program to repair a flash drive

In fact, there are much more such free utilities for repairing flash drives than are listed here: I tried to take into account only relatively “universal” tools for USB drives from different manufacturers.

It is quite possible that none of the above utilities are suitable for restoring the functionality of your USB drive. In this case, you can use the following steps to find the program you need.

Additionally: if all the described methods for repairing a USB drive did not help, try.

There are several solutions for creating data backups:

1. Applications built into the operating system. Microsoft Windows provides data backup methods that involve saving files and data on external or built-in storage media. All modern versions of Windows already include the ability to create a backup copy of necessary files or the entire hard drive, if necessary. The functions provided by Windows are complete and independent, and are aimed at ensuring that you do not need to use third-party services or programs.
2. Copying data manually. You can always use the old proven method of creating a data backup - manually copying the data to an external storage medium. This is a long process, but if you work with a small amount of data, this solution may be quite acceptable for you.
3. Online services. Recently, the most modern method of data backup has become increasingly popular - these are numerous online services. Companies that provide backup of your files directly on the Internet. A small background application installed on the computer creates copies of the necessary data and stores them on a remote server. However, the volumes provided by such companies for storing your files in the free version do not allow them to be used as a comprehensive solution. Often the space offered for data backup does not exceed 10 GB, so there is no need to talk about creating a backup copy of the entire hard drive. Such services are rather aimed at reserving a separate number of files.
4. Creating a disk image. This is the most complete data backup solution used by advanced users. This method involves using a third-party program to create an image of the entire disk, which can be deployed, if necessary, on another storage medium. Using this solution, you can in a short period of time gain access to all the data that was on the disk at the time of its backup: documents, programs and media files.

Silicon Power flash drive models for 64gb, 32gb, 16gb, 8gb, 4gb, 2 gb:

• Jewel;
• Touch;
• Blaze;
• Mobile;
• xDrive;
• Secure;
• Marvel;
• firma;
• Ultima;
• Unique;
• Helios;
• LuxMini;

Restoring a flash drive often helps restore its functionality and damaged memory locations. The only disadvantage of recovery is the complete formatting of the flash drive, which leads to clearing its memory of all data.

Silicon Power USB drives can be restored using several special programs that the company has released. In addition, you can use third-party recovery programs.

Recover Tool helps to fix damaged memory sectors of flash drives with Innostor IS903, IS902 and IS902E, IS916EN, and IS9162 controllers.

To restore the functionality of the flash drive, you need to download the program and run the initialization file.

Next, you need to connect the flash drive to your computer, and the program will automatically recognize it. If the software cannot detect the device, it means it cannot connect to the controller and the user should use another program.

If detection is successful, the “Start” button will appear. You need to click on it and wait for a message about the successful recovery of the flash drive.

The second program from the Silicon Power recovery package includes not only the ability to restore the functionality of a flash drive, but also other important functions.

First you need to go to the official website and download the program.

After downloading the program, you need to run the installer and wait for the installation to complete successfully. Next, you need to connect the flash drive to the computer and make sure that the program recognizes it.

Next, we will run diagnostics to detect errors. As soon as the program finishes the analysis, the test results will appear. If errors are detected, you will be offered to restore the memory of the flash drive and further format it, but if the media does not work correctly, but the program does not generate errors, most likely the problem is a virus.

To clean a flash drive from viruses, you need to scan it with an antivirus and perform the necessary cleaning option.

Formatting a flash drive is carried out in the “SECURE ERASE” menu, where the user will be offered two methods - quick formatting and full formatting.