High speed connection windows 10

The question of how to connect the Internet on Windows 10 is extremely relevant, since when working on a PC in 2018, you always need the Internet, which means you also need instructions on how to connect it.

It happens that installing “ten” causes some difficulties for some users with access to the World Wide Web. Or, after some update, all the access point settings simply disappear and there is no way to access your favorite sites or communicate with friends via social networks.

Therefore, let's decide what methods of accessing the Internet are generally available for the “ten”:

• Regular Ethernet connection by connecting to an ADSL modem or router, which are issued by providers;
• High-speed PPPoE connection in the system;
• Access to the World Wide Web via Wi-Fi;
• Setting up access via 3G/4G USB modem.

This option is increasingly popular today and should not cause you any particular difficulties. Moreover, the provider that provides such services provides all the necessary equipment and provides technical support. All settings must be made on the modem itself, and the user will only have to connect the cable to the PC.

If this does not happen in the “top ten”, then you need to turn to the network settings. To do this, go to “Sharing Center” and then to “Change adapter settings”. After that, select “Ethernet” - “Properties” - “IP version v4” - “Properties”. Here you need to set automatic detection of IP and DNS addresses. After this everything should work correctly.

High-speed PPPoE connection in Windows 10

In this case, the actions are almost completely consistent with the previous method, but the PPPoE connection itself is first created. So, let's do everything point by point:

• Network and Sharing Center;
• Internet connection;
• Further;
• High speed (with PPPoE).

At this stage, you will need to set the login and password issued by the provider. Here you should check the boxes next to the items with data storage. All you have to do is click “Connect” and that’s it.

We will tell you how to set up Wi-Fi and create a connection via a 3G/4G modem in other articles.

Wireless connection (Wi-Fi)

Modern technologies are such that almost everything is gradually moving away from cables and wires. Therefore, it is not surprising that access to the World Wide Web is also carried out through the air, which is called Wi-Fi or Wi-Fi. There are no requirements for your Windows 10 PC other than the presence of a special built-in module - a Wi-Fi receiver.

This module is built into most laptops, but is practically not found in desktop computers. But it is quite possible to purchase it for any device; for this, both whole cards (boards) and external modems are used. Then you can go online. For this purpose, your OS initially provides such an opportunity. In the lower right corner, where other connections are, expand the wireless connections panel and select network.

Next, you need to set up your wireless connection. This is done according to the instructions from your provider. But you can also use other people's networks - for example, in public places or your neighbors. As a rule, they are password protected, but they can also be password protected. To connect you will need to find at least one active network. If there are no networks around you, then you will not see anything to hook on to.

We hope that now you know how to connect a Windows 10 computer to the Internet and you can use the World Wide Web for your pleasure. But be extremely careful, as there are many problems lurking on the Internet, ranging from negative information to banal viruses. Therefore, even before the release and or another solution for the security of your computer.

How to properly connect and configure the Internet on personal computers with the Windows 10 operating system is the topic of the article. It will be especially useful for unprepared users who have updated their PC to the latest version, but still have not understood all the intricacies of the settings. Some users do not know where and what is configured to connect to the Internet, while for others it does not work at all, even with the parameters set correctly.

You will learn four different connection methods - standard Ethernet network, high-speed PPPoE connection, wireless connection, Wi-Fi technology, and modems.

So, how to set the correct parameters, or configure the connection again if the Internet is not connected.

There are several ways to connect your computer to the global network. You will learn about four basic connections:

• About a standard Ethernet connection that is connected using a cable. This uses a direct connection, modem technology or a router.
• About a high-speed connection that supports the PPPoE tunneling protocol.
• About wireless, Wi-Fi, technology.
• About connecting to the Internet using 3G/4G USB modems.

So, what is each connection and are there any subtleties in its settings. The first method, an Ethernet connection, is the most common.

Ethernet: connecting to the Internet in Windows 10 via a network cable (router, modem)

Ethernet, a packet data technology, is called the simplest connection. Internet service providers install network cables into homes and connect individual apartments. With this connection, the Internet can be connected directly or through a router or ADSL modem. This is the same Internet connection, but connected using different devices. To be more precise, a network cable is used everywhere, only the connection method is different - direct or through special devices for packet data transmission.

To set up an Ethernet connection, connect the cable from your router, modem, or service provider to your personal computer into the special connector for network cards:

With the correct settings, the connection will occur automatically, and you do not need to enter any passwords or logins: they are absent in this connection. If the connection status changes in the notification panel, it means the Internet is working. What to do if the network cable is connected normally, but the computer does not see it? You need to look for the reason in the drivers for the network card.

This is a common problem after a system update. The driver for the card is installed automatically during the update by the OS itself, but for some reason it does not work. And you can solve the problem by installing the correct driver. To do this, you need to download it from the official page, selecting your PC model, and install it on your device.

Now, what should you do if, after connecting the cable, the connection is activated, but its status is “ Limited"? The reasons may be hidden in incorrect parameters of the Ethernet adapter.

To check that the settings are correct and set the desired parameters, do the following:

If all parameters are correct, the Internet connection status will be active. If the status does not change, try rebooting. If even after a reboot the network is not found, not recognized, or is limited, make sure that the network cable, router, or modem is connected correctly. Also contact your service provider's technical support - the problem may be on their side.

If you connect without routers and modems, that is, directly, check with your provider for the terms of provision of Internet services. You may need to bind your Internet connection to the MAC address of your network card. If this is so, then after binding, your Internet will work immediately.

Setting up a high-speed connection (PPPoE) in Windows 10

PPPoE or high-speed connection differs from Ethernet in just a few nuances. Internet service providers also install cables into homes and connect individual apartments. But to connect to the Internet in this case, you will need a password, login and possibly some additional settings on your PC or router if wireless technology is used. But this is not the most important thing. For the Internet to work, you need to connect it, that is, first create a connection, and only then enter logins and passwords.

If you use a router with configured connections (including PPPoE) to connect to the Internet, you do not need to change any settings on your PC. Simply connect the cable to the device and configure it as you would with an Ethernet connection.

If you connect to the network directly via cable, without devices, and with a password and login, you must first create this connection.

To create a connection, do the following:

Click on the icon and delete, change connection parameters, etc.

Internet connection via Wi-Fi

If you have a Wi-Fi router, you can connect to the Internet using wireless technology. You can also connect your PC to the network of friends and other places where there is free access. The first thing to do when using this internet connection is to check the driver. If it is installed, the system usually does this automatically, open available networks, select your Wi-Fi and enjoy the connection. Well, perhaps you will first have to enter a password if there is protection.

Connecting via wireless, Wi-Fi, technology on Windows 10 is easy.

Setting up the Internet via a 3G/4G modem in Windows 10

And finally, the fourth method of Internet connection, which uses 3G/4G modems (3rd and 4th generation of mobile communications). The first step is to connect the modem to the computer. But for the device to work, a working and suitable driver must be installed for it.

It is better to download drivers from official resources - it is more reliable. This is the case if you did not find a disk with them in the box with the modem. When searching for a driver, focus on the modem model. If it has not yet been released by the manufacturer for Windows 10, download it for other versions of the OS. Should come up.

The modem is connected, the driver is installed and the setup begins. Looking ahead: the connection is configured in almost the same way as high-speed PPPoE Internet.

So do this:

If the parameters are set correctly, you will see the connection created and activated. If not, the settings may be incorrect or the modem is not properly connected to the PC. If this does not help, contact technical support for clarification. If coverage is poor and the signal level is weak, the Internet will be slow or not work at all. Sometimes increasing the signal level helps, but it is best to worry about buying an antenna for the modem.

The connection you created can be edited, deleted, etc. To change settings and other actions, click on its icon.

There is an icon for your connection in the notification panel. Monitor its status, stop, reconnect, set new parameters if necessary, etc.

This is how you can easily and quickly connect and configure the Internet on Windows 10.

And a few more words

Now, by connecting your computer/laptop to the Internet, you can turn it into a Wi-Fi router and distribute the Internet to peripheral devices - other PCs, smartphones, tablets. In this case, you do not need to buy special equipment for this. All you need is to create an access point on your computer using one of the free specialized utilities. . Even an untrained user can understand it.

You connected via cable or wireless network, setting the correct settings, but the Internet did not work, and you see a notification and a yellow exclamation mark? This error is common on personal computers with Windows OS, both in the new version and on old ones.

Hello friends! We continue to understand setting up the Internet and solving various problems in Windows 10. I have already prepared several useful articles on this topic, I will provide links below. Well, in this article we will set up the Internet in Windows 10. Let's talk about setting up a regular network connection, high-speed connection (PPPoE), Wi-Fi networks, and 3G/4G modems. I think the article will be useful to many. After all, after upgrading to Windows 10, not everyone can immediately figure out where and what to configure and how to do it. And there are cases when, after upgrading to Windows 10, the Internet simply does not work. Most likely, you just need to reconfigure the connection.

We know that there are different ways to connect our computer to the internet. In this article I will try to talk about setting up basic connections:

• Setting up a regular Ethernet connection. Connecting the cable directly from the provider to the computer, through a router, or ADSL modem.
• Setting up a high-speed connection (PPPoE) in Windows 10.
• Internet connection via Wi-Fi.
• Internet setup via USB 3G/4G modem.

Now we will take a detailed look at setting up an Internet connection through the connections listed above. You should find out what kind of internet you have, and you can immediately go to the desired subheading in this article. Let's probably start with Ethernet - a very popular way to connect to the Internet.

Ethernet: connecting to the Internet in Windows 10 via a network cable (router, modem)

Let's look at the simplest connection first. If your Internet provider simply laid a network cable into your home, and the provider did not provide a login and password for connecting to the Internet, then you have a regular connection using Ethernet technology.

The Internet connection in Windows 10 is configured in the same way via a router or ADSL modem.

To set up such a connection, just connect the network cable from your provider (router or ADSL modem) to your computer (laptop) into the network card connector:

If everything is fine with the Ethernet settings on the computer (no one has changed them), then the Internet should work immediately (you will understand this by the connection status on the notification panel). If the Internet via a network cable does not work, the computer simply does not respond to the cable being connected, then see this article. I myself faced such a problem.

If the connection appears, but the status is Restricted, or the network is unidentified, and the Internet does not work, then you need to check the parameters of the Ethernet adapter.

In Windows 10 this is done like this:

Right-click on the Internet connection status in the notification panel and select Network and Sharing Center. Next, click in the new window on the item Change adapter settings.

Right-click on the Ethernet adapter and select Properties. Select IP version 4 (TCP/IPv4) from the list. If the checkbox next to this item is not checked, be sure to check it, otherwise the Internet will not work. So, select “IP version 4 (TCP/IPv4)” and click the Properties button.

In the new window, check that the automatic settings for obtaining IP and DNS addresses are set, and click Ok.

The Internet should already be working. If not, then restart your computer. If you still can’t establish a connection, then check the cable connections to see if there are any problems on the provider’s side, whether the router or ADSL modem through which you are connecting is working normally (if you do not have a direct connection to the provider).

If you are trying to set up an Ethernet connection directly from your provider, and the Internet does not want to work for you, then ask your provider if they bind by MAC address. If it does, then you need to tell the provider the MAC address of the computer. He will register it in his settings, and the Internet will work. Few providers use such a binding, but it does happen. Read how to find out the MAC address in Windows 10 here.

That's it, we've sorted out this type of connection, then we have a high-speed connection.

Setting up a high-speed connection (PPPoE) in Windows 10

If your Internet provider laid a cable into your house and provided you with a login, password, and possibly some other data for connecting to the Internet that you need to set in the settings of your computer or Wi-Fi router, then you need to configure High-Speed ​​on Windows 10 connection (PPPoE). What are we going to do now? Essentially, this is the same as Ethernet, but here the Internet will not work until we create connections.

If your connection to the Internet is through a router and a connection is configured on it (PPPoE, L2TP, PPTP), then you do not need to configure anything on your computer. Just connect the network cable from the router to the computer. I talked about setting up such a connection above.

If you connect the cable directly to the computer, and you have a username and password to connect to the Internet, then you need to create a connection.

Open the Network and Sharing Center:

Click on the item Create and configure a new connection or network. Then, highlight the Internet Connection item and click on the Next button.

In the next window, select the item: High-speed (with PPPoE).

Next, set the username and password that your Internet provider must provide to you. You can also set a name for the connection, for example: “Beeline high-speed connection”. And you can also check the boxes next to the items saving the password, displaying the password and allowing other users to use this connection. I recommend checking the box next to Remember this password.

Click on the Connect button, and if everything is connected correctly and the parameters are set correctly, a connection will be created and a connection to the Internet will be established.

You can see and manage this connection by clicking on the Internet icon in the notification panel.

Clicking on a connection will open the Dialing menu, where you can connect, delete, or edit connection settings.

Internet connection via Wi-Fi

If you have a Wi-Fi router installed at home, or you want to connect your laptop to the Internet with friends, in a cafe, etc., then you can use Wi-Fi for this. If you already have a driver installed for your Wi-Fi adapter, and Windows 10 almost always installs it automatically, then all that remains is to open the list of networks available for connection, select the one you need, specify the password (if the network is protected), and you are already connected to the Internet.

On this topic, I have already written a detailed article: how to connect to Wi-Fi on Windows 10. I think there should be no problems connecting to a wireless network.

Setting up the Internet via a 3G/4G modem in Windows 10

All that remains is to consider setting up a connection via a USB 3G or 4G modem. On a computer with Windows 10, setting up such a connection will be practically no different from setting up 3G Internet on Windows 7 (article using the example of the Intertelecom provider).

First of all, we need to connect the modem to the computer and install the driver for our modem. The driver can be downloaded from the modem manufacturer’s website, from the Internet provider’s website, or simply found on the Internet. Search by modem name and model. Also, the driver can be on the disk included with the modem, or on the modem itself. If there is no driver for your modem for the Windows 10 operating system, then try to find one for Windows 8, or even Windows 7. Perhaps it will work.

After you have installed the driver, connect the modem to your computer, and you can start setting up a 3G connection on Windows 10. By the way, everything is almost the same as when setting up a high-speed connection.

Open the Network and Sharing Center.

Click on Create and configure a new connection or network and select Internet Connection.

And we set the parameters that the provider provides: number, username and password. I showed the example of the Intertelecom provider. I recommend checking the box next to Remember this password. Specify a custom connection name. Once you have filled in all the fields, click on the Create button.

If everything is ok, a connection will be created and a connection to the Internet will be established.

If the connection fails, check all the parameters and the USB modem connection. It may also be that your provider's coverage is very poor. In such cases, the Internet may not connect at all, or work very slowly. I wrote here how to see what your signal level is and how to increase it. In some cases, if the network is very bad, you need to install an antenna for your modem.

You can start, stop, delete, or edit the created connection by clicking on the Internet connection icon and selecting the created connection.

The Internet connection status is always displayed in the notification panel. By clicking on it, you can disconnect from the Internet, or start the desired connection.

And a few more words

I also provide a link to instructions for setting up Internet distribution from a laptop on Windows 10. If you have other devices besides your computer that can connect to the Internet via Wi-Fi, then you can distribute the Internet even without a router.

No matter how you set up the Internet, you may encounter the popular “Limited” error. When the Internet does not work, and there is a yellow exclamation mark next to the connection status. We dealt with this problem in a separate article.

The article turned out to be long, but it didn’t seem confusing. I would like to fully answer the question posed in the title. I hope you found useful information in this article and connected your Windows 10 computer to the Internet.

You can ask questions in the comments. Before describing your problem, read this article carefully. Perhaps the solution has already been written. Also, look at the links to other articles, there is a lot of useful information on the topic.

help-wifi.com

These instructions are suitable for setting up a PPPoE connection directly to a device running Windows 10. Please note that these instructions are not relevant if you use a router on your network.

Setting up a PPPoE connection for Windows 10 is generally similar to setting up a PPPoE connection for Windows 7 or Windows 8 and consists of a few simple steps:

1. Make sure that the network cable is connected to the device, and there is a connection status indicator in the tray; next to it there should be a yellow warning icon - the network cable is connected, but the connection is not configured;

If a red cross is lit next to the indicator, it means the network cable is not connected or damaged.

also, if you have a wifi adapter, then the icon may look like this:

2. Right-click on the connection status indicator and go to Network and Sharing Center.

3. In the Network and Sharing Center, select Create and configure a new connection or network.

4. In the proposed list, select Internet connection.

6. Enter your credentials in accordance with the agreement:

• Username - ClientXXXX
• Password - Your Password (remember that the password must be entered in the same way as it is written in your agreement)
• considering small and capital letters!

Be sure to check the boxes below so that the password is saved and you can visually compare whether everything you entered is correct.

7. If configured correctly, a few seconds after clicking the Connect button, you will be able to use the Internet.

In the future, to connect to the Internet you need to find the connection status indicator in the lower right corner, click on it and select the created connection:

Click again on the created connection:

And click connect:

www.ilimnet.ru

How to set up internet on Windows 10

Nowadays, it is impossible to imagine the life of many people without a computer and the Internet. As technology advances, not only computers improve, but also operating systems. Recently, everyone was happy about the release of the seventh and eighth versions of the operating system, but before they knew it, a full-fledged Windows 10 had already entered the market. Each subsequent version of the operating system is more functional and fresher than the previous one, so users immediately want to install it on their PC. Ten." And then a problem appears: the connection to the Internet is lost. The question arises: how to set up Internet access? We will talk about this in this article.

Reasons for lack of Internet on Windows 10

Let’s note the reasons for the lack of Internet, because it may well be that the “ten” has nothing to do with it, and you should make sure of this. There are several main reasons for the lack of Internet in the top ten:

• Damage to the network line is the main reason for the lack of Internet. There may be a break or deformation of the cable, or a breakdown in the normal operation of this or that equipment. First you need to call the provider and make sure that everything is in order with the wires and equipment.
• If connection to the Internet is provided using a 3G modem or SIM card, then the lack of network may be due to poor network coverage of the mobile operator.
• If the Internet is provided via Wi-Fi, the reason for the lack of access may be the excessive distance of the Wi-Fi router from the PC.
• Deformation of the home network cable or connector - look at the home cable and connector and make sure they are in good condition.
• Router malfunction - to make sure that the router is not the cause, unplug it from the network for a few seconds.
• The network card in the Wi-Fi adapter is malfunctioning - you need to restart the PC and remove the adapter from the connector. After a minute, put it back in.

So, we went through various options and, through the process of elimination, realized that of the above reasons, none of them are “yours.” Then one thing remains: the Internet connection settings have been lost due to the reinstallation of the operating system. In this case, you just need to check and re-set the necessary settings.

If the problem of lack of Internet access is software and can naturally be solved specifically from your PC, then it can be eliminated without effort. First of all, check the properties of the adapter, and this is not difficult to do. Click on the Internet icon, then select “Network settings”. Here you will need the “Enternet” item, in it select the line “Configure adapter parameters”. A window will open where you select the network you need, then right-click on the “Properties” button, then on the “Properties” section. Another window will open, where you need to check whether there are checkboxes next to IP version 4 and IP version 6. If the “birds have flown”, check them again. The Internet may not work due to failure to receive an IP address.

Internet connection settings on Windows 10

Let’s say you find out that everything is fine with the IP address, all the checkboxes are in their places, but the Internet still doesn’t work. In this case, create a new connection according to the instructions.

On your monitor on the right you will see the “Networks” icon and right-click on it, then select the line “Network and Sharing Center”. A window will open in which you need to select “Create a new connection or network.”

A list will appear, from it select the line “Internet Connection”, then click the “Next” button. The system may notify you that the Network connection has already been completed, but you persistently click on the line “All right, create a new connection”, then select “High-speed connection”.

A window will appear in which we enter the information specified in the agreement with the provider:

• Username.
• Home address.
• Password.

After the procedure, check the “Fill in password” checkbox. Then in the “Connection name” section, enter any name for the shortcut, and then click the “Connect” button. When the connection is complete, click “Close”.

Now you know how to set up a connection to the Internet on “Ten”, and it’s not at all difficult; if something doesn’t work out for you, contact your provider and call a specialist to your home who will perform all the necessary settings. Enjoy Windows 10 and its Internet without interruptions!

SovetClub.ru

How to set up an automatic Internet connection in Windows 10

Windows 10 is a relatively new system, and not all users can figure out its problems on their own. One of the common difficulties is establishing a network connection.

Internet setup

There are situations when, after updating to the tenth version, i-net stops working. This is due to the innovations inherent in the new Windows. The standard network connection (PPPoE), setting up Wi-Fi networks, and 3G/4G modems need to be reconfigured.

There are different ways to connect your computer to the network. The most commonly used connections are:

• Network connection with Wi-Fi module.
• Installing a standard Ethernet cable connection using a modem or router.
• High-speed pairing (PPPoE) in Windows 10 version.
• Installation with USB 3G/4G modem.

To start setting up, it's useful to know exactly what type of Internet connection you have.

Features of all types of connections

Ethernet - connecting to a network in Windows 10 using a network cable.

This is the simplest type of connection. If the provider did not tell you the password and login for the connection and the Internet is connected via a cable or modem, then you have the most basic type of Internet connection - Ethernet.

To set up communication with the global network, you need to connect the provider's cable to the modem or router, and the wire from it to a laptop or computer (into the network card cell).

If no “craftsman” has changed the options, the connection will automatically start working. You will see the connection status in the notification panel.

Possible problems

If the computer does not respond to the wire, then you need to do the following. First, check the modem’s connection to the network. Then reboot it. If possible, check the cable on another computer. If it works, then the problem is directly in the computer.

First of all, it is recommended to check whether the driver is installed on the network card. If not, you need to install it (but usually a dozen install drivers on the device themselves), if yes, then reinstall it. It most likely won’t work through the device manager; it’s better to download your computer brand from the official website of the manufacturer. If you can’t download the driver for ten, try Windows 8 or 8.1 - they will do.

The second option is that “unidentified network” may be displayed. Then you need to check the adapter parameters. To do this, click on “network control center” and find in the menu the item “change adapter settings”. In the properties, find “IP version 4 (TCP/IPv4)”. There must be a check mark next to it.

High-speed connection (PPPoE) in Windows 10

If you have a cable connection, but the provider has issued information (login and password) that must be entered when turned on, then you need to set up a high-speed connection (PPPoE) on your computer device. It is similar to the Ethernet type, but here the Internet will not work until you enter the data and create a connection.

If the connection was created through a router, then no additional settings are required on the PC. Just connect the cable and that's it.

But if the cord is connected directly to the computer, then you need to configure it:

1. Open the “network control center” and click on the “create a new connection” section, then “connect to the Internet”. Find the required type in the window that appears. In this case it is “High Speed ​​(with PPPoE)”.
2. Enter the name and password given to you by your provider. It is better to check the boxes with the “remember this password” function.
3. Click the “connect” button, and if you did everything correctly, you will receive a connection notification.

Setting up the Internet via a 3G/4G modem in Windows 10

For this type of connection, the first thing you need to do is connect the modem to the computer and install the driver downloaded from the official website of the modem manufacturer. It can come complete with a modem, on a disk. If you couldn't find the driver for Windows 10, download it for Windows 8, it should work.

After installing the driver, you need to connect the router to the computer and start setting up the 3G connection:

1. Go to the “network control center”
2. Click on “create a new connection or network” - “connect to the Internet.
3. You need to select the “dial-up” connection type.
4. Then you need to enter the data from the provider (name and password) and click “create”.

If you did everything correctly, then the connection will be established.

The Windows 10 operating system has become one of the most popular among users around the world today. On this page you will find a detailed guide to setting up various types of network connections on Windows 10. After reading the material, you will understand that everything is actually extremely simple.

So, in this article we will look at installing several types of connections:

• a regular Ethernet connection (DHCP, as a rule), which is widely used by most providers in various regions, i.e. connecting the provider cable to the Ethernet connector of your computer;
• high-speed PPPoE connection - used less frequently, but some providers use this type of connection to authenticate clients on the network;
• connecting to a Wi-Fi network using a laptop or PC with a Wi-Fi adapter;
• connection of external 3G/4G modems connected via a USB interface.

As you can see, there is simply a ton of material waiting for us that will be useful for study by any user who wants to acquire such a benefit of modern society as access to the Internet. So let's start with the most common type of connection, which is the Ethernet connection. Of course, all of the material below will be written with the average user in mind who just wants to connect their Windows 10 PC to the network. This means that we will not go into detail about the terminology.

Setting up a network connection DHCP and with a static IP address

DHCP-connection

The simplest Internet connection that many ISPs use is a DHCP connection. DHCP (Dynamic Host Configuration Protocol) is a dynamic host configuration protocol. That is, all the necessary data for connecting to the network and gaining access to the Internet is automatically sent to your computer if the appropriate settings are configured on it.

Checking what type of connection you have is quite simple: take the cable from the provider that he ran into your living space and connect it to the Ethernet connector on the system unit (technically, the motherboard). As soon as you do this, you will immediately have access to the Internet. Yes, everything is that simple, and you don’t even need to configure anything. However, if you have a DHCP connection, but nothing happened when you connected, then you may not have your IP address and DNS server address set to automatically obtain.

To automatically receive this data, you need to do the following:

• then click on “Configure adapter settings”;
• double-click on the network connection in the new window;
• click on the “Properties” button;
• double-click on the “IP version 4 (TCP/IPv4)” component (or IP version 6, if your provider uses this protocol);
• check the boxes next to the options for automatically obtaining an IP address and DNS server address;
• save the settings.

If you have a DHCP connection, you should immediately have access to the Internet. However, it should be noted that the settings for automatically obtaining IP and DNS are set by default in Windows 10, so you most likely will not have to use the above steps. However, if you have problems, use them.

Connection via static IP address

In addition to the DHCP connection, some providers provide their users with a connection using a static IP address. If you have such a connection, then in order to access the Internet, you will have to tinker a little with the settings.

If you have a connection via a static IP address, then the provider should have notified you about this and also provided the data to complete the connection. Connect the ISP cable to the Ethernet port of your motherboard. Then go to Network Connections→Configure adapter settings→Double click on the network connection→Properties→IP version 4 (TCP/IPv4) (or TCP/IPv6 protocol).

Check the boxes next to the options for manually setting the IP address and DNS and enter the addresses that your provider indicated to you (or find them in the contract). Save the network connection settings, after which access to the Internet will be open. As you can see, it's a little more complicated than with a DHCP connection, but still extremely simple.

Setting up a network connection with PPPoE

Some providers provide their clients with a network connection to access the Internet using the PPPoE protocol. In essence, this protocol is used for the user authorization system. If your provider uses this protocol, then he must have provided you with the necessary data to authorize the network. Sometimes they may be included in the connection agreement.

So, let's now figure out how to connect to the Internet through a PPPoE connection. You will need to do the following:

• Right-click on Start and select “Network Connections”;
• then click on “Network and Sharing Center”;
• then click on the option “Create and configure a new connection or network”;
• Left-click on “Internet Connection” and click “Next”;
• Having opened the next window, select “High-speed (with PPPoE)”.

A window will appear in front of you in which you will need to enter the authorization data issued by your provider. Once you have finished filling out the required fields, click on the “Connect” button. If you have entered the authorization data correctly, you will immediately have access to the Internet, which, however, can also be easily understood by the network connection icon in the notification panel.

There, by clicking on the network connection icon, you can find a special “Dialing” menu, with which you can carry out various manipulations: modify the settings of your connection, delete it, or connect again. As you can see, everything is quite simple if you have the necessary data from the provider.

Connecting to a wireless Wi-Fi network

Connecting to an already installed Wi-Fi wireless network is an incredibly simple task that can be completed in just a couple of clicks. If you have a router in your home that distributes a wireless network, then you can connect to it using any device that has a Wi-Fi adapter, whether built-in or external.

To connect to a Wi-Fi network, you need to do the following:

• activate the Wi-Fi adapter on your laptop/computer;
• click on the Wi-Fi signal icon in the notification panel;
• select the network connection of your Wi-Fi router;
• click on the “Connect” button and enter the password, if necessary;

You won't have to do anything else. As soon as you enter the password and connect to the Wi-Fi network, you will be able to access the Internet. To disconnect from the network, click on the connection in the list again and click the “Disconnect” button.

Setting up 3G/4G connection

If you prefer to use more mobile versions of Internet connections, then they can be easily set up on Windows 10. Let's see how to set up a 3G/4G modem. So, the very first thing you need to do is connect the purchased modem to your computer and install drivers for it. You can find the driver on the manufacturer’s official website or on the physical media included with the modem. In general, you can even just find it on the Internet.

Once you have completed installing the required driver, let's now move on to creating the connection. It is worth saying that it is created almost exactly the same way as a PPPoE connection. Do the following:

• right-click on Start and select “Network Connections”;
• then click “Network and Sharing Center”;
• then click on “Creating and setting up a new connection or network”;
• LMB select the “Internet Connection” item and click the “Next” button;
• select the connection type “Dial-up”;
• Enter the required data in the fields and click on the “Create” button;

After clicking the button, the network connection will be successfully created, and you will also have access to the Internet. However, the speed of your connection will depend solely on how good the quality of communication with your telecom operator is. But you probably already know about this. To make any additional settings in the created connection or disconnect from it, you need to click on the icon in the control panel.

Found a typo? Select the text and press Ctrl + Enter

If you have at least once encountered the technical support of an Internet provider, or the support of any program related to a local network or Internet access, then most likely you were asked about setting up your computer’s network parameters. For novice users, this is a dark forest, of course. And such a question puts the poor fellow into a complete stupor. As a result, for the simplest manipulations you have to call a computer technician and pay him money. But everything is very simple. In this post I will talk in detail about the basic network settings in Windows 10.

In the Windows 10 operating system, network settings mean the configuration of the TCP/IP protocol on the network adapter, as well as setting the parameters for accessing the computer from the network (local or global).

1. IP Protocol Version 4 (TCP/IPv4)

Click the Start button and enter the following words in the search bar:

View network connections

The result should look like this:

Click on the icon from the control panel and we will open the “Windows 10 network connections” window:

Select the one you need and right-click on it. The properties window will open. These are the main adapter network settings in Windows 10:

Now we need to find the parameter IP version 4(TCP/IPv4) and double-click on it with the left rodent button. This brings us to the configuration of the main IP network protocol. There are two options for setting it up:
1 — dynamic IP address.

This option is relevant when a DHCP server is running in the local area and the computer already receives its IP from it. It is usually used when connecting a PC to a home WiFi router or to a telecom operator's network. The protocol protocol configuration in this case looks like this:
That is, the system receives all addresses automatically from a special server.
2 - static IP address. In this case, the IP must be registered statically, that is, this address will be assigned to this computer on a permanent basis. It looks like this:

What addresses should be entered in the fields?
Look, the screenshot above shows an option for connecting to a router or modem that has the DHCP server disabled.
The gateway IP is the address of the router itself on the network. It will also be used as the main DNS.
Secondary DNS can be specified as the provider's server, or public DNS servers Google (8.8.8.8) or Yandex (77.88.8.8).
The mask used in home networks in 99 cases out of 100 is regular, 24-bit: 255.255.255.0.
The IP address must be selected from the gateway subnet. That is, if the gateway is 192.168.1.1, then you can take any number from 192.168.1.2 to 192.168.1.254 from the computer.
The main thing is that he is not busy with anything else.
Click on OK and close all windows! The main network protocol in Windows 10 is configured.

2. Sharing

Configuring these network settings is responsible for accessing the computer from the network. To get here you need to select your adapter (WiFi or Ethernet) in the Network and Internet section and click on the “Change advanced sharing settings” icon. This window will open:

Here you can see network access settings for several profiles: Private, Guest or all networks. Select the one with the mark (current profile) at the end.
First comes Network discovery. It is responsible for whether your PC is visible from the network or not. If you are connected to a local network at home or at work, then it is better to leave it turned on. But when the computer is connected to the Internet directly, then to avoid threats and attacks, it is better to disable detection.
Next comes File and Printer Sharing. If it is turned on, then anyone can connect and use the printer that is connected to your PC. For a home network this does not matter, but in a corporate or public network it would be better to disable it.
Last parameters - Connecting a home group. It is responsible for guest access from the network to the computer. If you allow Windows to manage connections, access will be through the Guest account. This is more convenient on a home network. For others, it’s better to use user accounts so that anyone can’t access you.
Save the changes.

These are the main network parameters of Windows 10, which are responsible for the operation of the network and connecting the computer to the Internet.