Zte blade x9 official firmware. Flashing ZTE Blade: instructions, firmware, download links. Getting root rights to ZTE Blade X9

Dear forum users, this article contains information about the mobile device. Here you can download the latest Android firmware for ZTE Blade X9, and you can also get root rights.

You can learn more about root rights. Instructions for obtaining are below.

When to update the firmware

• I would like to install new firmware to expand the capabilities of the smartphone;
• Recovery after unsuccessful firmware is required
• The device constantly reboots for no reason;
• The device does not turn on.

What firmware do we have?

To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on ZTE Blade X9, read the entire article - this is important. When you install a new available version of Android, you will be surprised by the possibilities that appear. You can also download the official version of MIUI firmware of different versions and custom original firmware.

If you have questions, you can always ask them through the comment form.

Availability of firmware: In stock.

Download firmware

When writing a review through the comment system, indicate your real email if you have problems installing the firmware. Please note that we provide free consultations, so there may be a delay in responding. In addition to the administration, ordinary users can answer and help you, everything is like on the forum.

The manual on how to install the firmware is located at the links below. Firmware download for ZTE Blade X9 is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

To install, do the following:

• Download the file with firmware and special program
• Run the program on your computer
• Select the required firmware version
• Strictly follow all instructions from the archive

ZTE Blade X9 firmware video

On this page we will not describe the pros and cons of this Android device; we are really looking forward to your feedback about the device. Here you will find and be able to download custom original firmware, the official version of MIUI v4, MIUI v5 android firmware from our website, and you can also see video instructions for installing the firmware for ZTE Blade X9 and leave a review.

To download firmware for your phone ZTE Blade X9 with Android 7.0 Nougat, Android 6.0 Marshmallow (aka Android M or Marshmallow) or Android 5.0 Lollipop, you need to read the entire page and find the link. There are also firmware Android KitKat 4.4.x (Kitkat) and Android 4.3 Jelly Bean (Jelly Bean), as well as older versions, but we do not recommend downloading them, due to the fact that this is outdated software. The fifth version of Android has stepped far ahead of its predecessors, not to mention versions 6 and 7, worked out to the smallest detail. Below you will find an overview of the latest versions of Android and can compare them.

Don't forget to write a full review about this model in the comments. By doing this, you can help other users make a decision about purchasing a device.

Availability of firmware: In stock.

Download firmware

When adding a review to our website through the comment system, do not forget to indicate your real email if you need advice and were unable to install the firmware according to our instructions. Instructions for firmware are on the download page. Our assistance in the form of consultations is free and therefore there may be delays in our responses, since there are many people interested. Downloading firmware for ZTE Blade X9 can be done either through a torrent with instructions in Russian, or directly without depositfiles and other bloodsuckers.

Installation instructions

• Click on the download link, selecting the firmware you need

1. Download Android M firmware - we checked you, to be honest M is Marshmallow, follow the second link

• Download the file with firmware and application
• Run the application file
• Select the required firmware version
• Follow the instructions from the file archive

ZTE Blade X9 firmware video

Device price

The price in local currency depends on the dollar exchange rate.

useful links

Getting root rights to ZTE Blade X9

If you want to get root rights, I recommend that you use the program Rootkhp for computer - this is one of the new programs with a large base of supported smartphones and tablets on Android. The program runs only under Windows; for Linux and Mac OS systems, it is recommended to use emulators.

You can download the program for free from the official website Rootkhp.pro, which is easily found via Google.

How to unlock a pattern key

Removing a forgotten pattern key, regardless of its complexity, has ceased to be a global problem even for an ordinary user who is little familiar with the security mechanisms of the Android operating system and its loopholes. Not long ago we came across a program for unlocking the Gaigunlock graphic key (Gaigunlosk). Step-by-step instructions in Russian and a description of how the program works are published at the link above.

Perhaps no ZTE model has as many official and custom firmware as the ZTE Blade. It is difficult to say which of them is the best firmware for ZTE Blade, it depends on personal preferences.

Before considering any ZTE Blade firmware options, it is necessary to mention that this smartphone comes in two versions: Gen1 and Gen2. You can determine Gen using the Ask Mr Pigfish application, developed specifically for ZTE Blade. You can download it for free in the Google Market. Gen2 has some advantages over Gen1, for example, better signal strength, HSUPA support, 850mhz band for GSM and 3G, as well as the ability to install new versions of Cyanogenmod in the future.

Instructions for moving from Gen1 to Gen2

It is assumed that ClockworkMod Recovery and drivers are already installed.

• Download the firmware or and put it on the phone’s SD card.
• Download and transfer the stock one to the memory card.
• With the smartphone turned off, hold down the volume “-” and “on” and go to ClockworkMod Recovery, then install the downloaded recovery via CWM as an update. After installation Reboot
• Download the archive with partition redistribution (cache; system; data). In this case, 136 MB are allocated for the system, and more than 2 megabytes are allocated for the cache.
• Unpack the archive on PC
• Turn off the smartphone, then hold down the volume “-” and “on”, when the FTM message appears, connect the phone to the PC.
• In the unpacked partition redistribution archive, run download_nochecksGen2.exe, click Start and do not touch anything until the installation completion notification appears. After completion, click OK.
• Go to “advanced” and select “Reboot Recovery”.
• CWM will restart, after which we install SS RLS4b or CyanogenMod from CWM (when installing SS RLS4b it will write your device generation Gen2).
• We make a Backup of the Channel1.nvm file, which will appear after switching to Gen2, in the folder from which download_nochecksGen2.exe was launched. This is necessary to save IMEI data in case of switching back to Gen1.

If after the transition there are problems when starting CWM, but the firmware has been installed, then download and install OneClickRecovery_ver2.apk and launch it. You can download the file.

Universal instructions for flashing ZTE Blade using CWM

It is assumed that CWM and firewood are already installed on the phone. It is advisable to install CWM version 3.0.1.4, which is suitable for firmware 2.2 and 2.3.

• Download the required firmware.
• Connect the USB cable.
• Go to Recovery.
• If there is no a2sd in the firmware, then continue from the next point, otherwise we format/partition the flash drive by selecting “advanced” in the menu - “partition sd - ext=512, swap=0, fat = the rest will be automatic”. A cheap flash drive can cause problems. In this case, you need to format the SD card on your computer in fat32, and then install the firmware, then split the flash drive and perform a full wipe. If suddenly the firmware becomes crooked, you need to flash it again.
• Doing “wipe data/factory reset”, “wipe cache partition” is not necessary, but you can also do “wipe battery”
• We copy the firmware to the flash drive without unpacking it (so that the PC can see the smartphone in CWM, in the “mounts-and storage” menu, select “mount USB storage”; when we have copied everything we need, click “unmount”).
• In Recovery, select “install zip from sdcard” and install the firmware.
• Finally, select “reboot system now”, after which the phone reboots.

This method is also suitable for installing updates on ZTE Blade.

As for updates, you can easily update your device’s OS to version 2.2 through the settings. You can download the firmware update for ZTE Blade to version FRY_RU_P729VV1.0.0B01 (OS Version: Android 2.2). The archive contains instructions for installing the update in Russian.

A significant number of official firmware for ZTE Blade is presented here. A large number of firmware can be found here. In addition to the fact that you can download firmware for ZTE Blade there, for clarity, a table with firmware versions of OS 2.1 and 2.2 is also presented, from which you can find out a lot of information about the required firmware When downloading, do not forget to check the compatibility (TFT or OLED).

You can watch the installation of firmware 2.3 7 on ZTE Blade in this video.

You can watch an overview of the ZTE Blade 4.0.4 firmware, as well as get some information about the installation from this video.

To install the ZTE Blade android 4.0 firmware, partition redistribution is required, but the author claims that he did not do this, and everything installed fine. In this case, ICS ColdFusionX CM9 Release 9 was installed. Those. This firmware was installed like any other custom firmware.