How to set up the Internet after reinstalling Windows 10

The question of how to connect the Internet on Windows 10 is extremely relevant, since when working on a PC in 2018, you always need the Internet, which means you also need instructions on how to connect it.

It happens that installing “ten” causes some difficulties for some users with access to the World Wide Web. Or, after some update, all the access point settings simply disappear and there is no way to access your favorite sites or communicate with friends via social networks.

Therefore, let's decide what methods of accessing the Internet are generally available for the “ten”:

• Regular Ethernet connection by connecting to an ADSL modem or router, which are issued by providers;
• High-speed PPPoE connection in the system;
• Access to the World Wide Web via Wi-Fi;
• Setting up access via 3G/4G USB modem.

This option is increasingly popular today and should not cause you any particular difficulties. Moreover, the provider that provides such services provides all the necessary equipment and provides technical support. All settings must be made on the modem itself, and the user will only have to connect the cable to the PC.

If this does not happen in the “top ten”, then you need to turn to the network settings. To do this, go to “Sharing Center” and then to “Change adapter settings”. After that, select “Ethernet” - “Properties” - “IP version v4” - “Properties”. Here you need to set automatic detection of IP and DNS addresses. After this everything should work correctly.

High-speed PPPoE connection in Windows 10

In this case, the actions are almost completely consistent with the previous method, but the PPPoE connection itself is first created. So, let's do everything point by point:

• Network and Sharing Center;
• Internet connection;
• Further;
• High speed (with PPPoE).

At this stage, you will need to set the login and password issued by the provider. Here you should check the boxes next to the items with data storage. All you have to do is click “Connect” and that’s it.

We will tell you how to set up Wi-Fi and create a connection via a 3G/4G modem in other articles.

Wireless connection (Wi-Fi)

Modern technologies are such that almost everything is gradually moving away from cables and wires. Therefore, it is not surprising that access to the World Wide Web is also carried out through the air, which is called Wi-Fi or Wi-Fi. There are no requirements for your Windows 10 PC other than the presence of a special built-in module - a Wi-Fi receiver.

This module is built into most laptops, but is practically not found in desktop computers. But it is quite possible to purchase it for any device; for this, both whole cards (boards) and external modems are used. Then you can go online. For this purpose, your OS initially provides such an opportunity. In the lower right corner, where other connections are, expand the wireless connections panel and select network.

Next, you need to set up your wireless connection. This is done according to the instructions from your provider. But you can also use other people's networks - for example, in public places or your neighbors. As a rule, they are password protected, but they can also be password protected. To connect you will need to find at least one active network. If there are no networks around you, then you will not see anything to hook on to.

We hope that now you know how to connect a Windows 10 computer to the Internet and you can use the World Wide Web for your pleasure. But be extremely careful, as there are many problems lurking on the Internet, ranging from negative information to banal viruses. Therefore, even before the release and or another solution for the security of your computer.

A question like setting up an Internet connection on Windows 10, worries many users who like to keep up with the times. This is not surprising, because the vast majority of modern people find it difficult to imagine their life without a computer, and therefore without the Internet. As technology advances, not only the computers themselves improve, but also the operating systems. More recently, everyone rejoiced at the appearance of the seventh and eighth versions of the famous Windows, but before they could even blink an eye, Windows 10 appeared in all its glory to the public.

It goes without saying that each subsequent version of Windows is more functional and more advanced than the previous one, so many users immediately wanted to install Windows 10 on their computers. And then a problem arises: the Internet has disappeared. And you have a logical question: how configure network access on Windows 10? Let's talk about this in this article.

Reasons for lack of Internet connection

To begin with, let us denote in general causes lack of internet connection, because it is quite possible that the “ten” has nothing to do with it, and you should make sure of this. So, there are several reasons for the “loss” of the Internet, namely:

• Damage to the network line - most often the Internet is disconnected for this reason. This may be a break or damage to the wire, failure of one or another equipment, or something like that. First, call your provider and make sure everything is ok.
• If Internet communication is provided via a 3G modem or SIM card, then access to the Network may not be possible due to poor network coverage of a particular mobile operator.
• If the Internet connection is made via Wi-Fi, the reason for the “loss” of access may be the excessive distance of the Wi-Fi router from the computer device.
• Damaged home network cable or connector - Check your home wire and connector to ensure they are in good working order.
• Router malfunction - to make sure that the router is not at fault, disconnect it from the network, and after a few seconds turn it on again.
• The network card or Wi-Fi adapter is malfunctioning - restart the computer device and remove the adapter from the connector. After a few seconds, insert it back.
• No matter how trivial it sounds, but perhaps you forgot to pay the tariff? If so, then you know what to do.

So, you have done everything possible and, using the method of elimination, made sure that none of the above reasons are “yours”. In this case, one thing remains: there were Internet connection settings are lost due to reinstallation of the operating system. Well, in that case, you just need to check and re-set them.

Checking adapter properties

If the problem due to which there is no access to the Network is software and, accordingly, can be solved directly from your computer device, then it can be easily fixed. First of all you need check adapter properties, and it's easy to do.

First, click on the Internet icon, and then select “Network Settings”. Here you will need the “Ethernet” item, and in it select the “Configure adapter settings” line.

A window will open in front of you where you select the desired network, then right-click on the “Properties” button, then again on the “Properties” button. Another window will open where you need to check whether the “birds” are checked next to IP version 4 and IP version 6. If the checkboxes are “off”, check them again. The Internet may not be working due to an IP address not being received.

Internet connection settings

Suppose you find out that everything is in order with the IP address, the checkboxes are safely in their places, but the Internet still does not work. In this case you need to create new connection in Windows 10, following the instructions.

On the monitor on the right, find the Network icon and right-click on it, and then select the line “Network and Sharing Center”. A window will open in which you should select “Create a new connection or network.”

You will see a list from which you select the “Internet Connection” line, then click the “Next” button. The system may tell you that the connection to the Network has already been completed, but you insist and click on the line “Create a new connection anyway”, then select “High-speed connection”.

A new window will appear in which you will need to enter the information specified in the agreement with the provider, namely:

• username (entered in Latin lowercase letters);
• home address (words are separated by an underdash);
• password (the one indicated in the contract).

After that, check the “Remember password” checkbox. In the “Connection name” section, enter any name for the shortcut (for example, “Internet” or “network”), and then click the “Connect” button. When the desired connection is completed, click on the “Close” button.

Now you know, how to set up internet on windows 10, and it's not as difficult as it seems. But if something doesn’t work out for you, just contact your provider and call a specialist who will make all the settings and answer all your questions. Enjoy the Internet and the power of Windows 10!

The Windows 10 operating system has become one of the most popular among users around the world today. On this page you will find a detailed guide to setting up various types of network connections on Windows 10. After reading the material, you will understand that everything is actually extremely simple.

So, in this article we will look at installing several types of connections:

• a regular Ethernet connection (DHCP, as a rule), which is widely used by most providers in various regions, i.e. connecting the provider cable to the Ethernet connector of your computer;
• high-speed PPPoE connection - used less frequently, but some providers use this type of connection to authenticate clients on the network;
• connecting to a Wi-Fi network using a laptop or PC with a Wi-Fi adapter;
• connection of external 3G/4G modems connected via a USB interface.

As you can see, there is simply a ton of material waiting for us that will be useful for study by any user who wants to acquire such a benefit of modern society as access to the Internet. So let's start with the most common type of connection, which is the Ethernet connection. Of course, all of the material below will be written with the average user in mind who just wants to connect their Windows 10 PC to the network. This means that we will not go into detail about the terminology.

Setting up a network connection DHCP and with a static IP address

DHCP-connection

The simplest Internet connection that many ISPs use is a DHCP connection. DHCP (Dynamic Host Configuration Protocol) is a dynamic host configuration protocol. That is, all the necessary data for connecting to the network and gaining access to the Internet is automatically sent to your computer if the appropriate settings are configured on it.

Checking what type of connection you have is quite simple: take the cable from the provider that he ran into your living space and connect it to the Ethernet connector on the system unit (technically, the motherboard). As soon as you do this, you will immediately have access to the Internet. Yes, everything is that simple, and you don’t even need to configure anything. However, if you have a DHCP connection, but nothing happened when you connected, then you may not have your IP address and DNS server address set to automatically obtain.

To automatically receive this data, you need to do the following:

• then click on “Configure adapter settings”;
• double-click on the network connection in the new window;
• click on the “Properties” button;
• double-click on the “IP version 4 (TCP/IPv4)” component (or IP version 6, if your provider uses this protocol);
• check the boxes next to the options for automatically obtaining an IP address and DNS server address;
• save the settings.

If you have a DHCP connection, you should immediately have access to the Internet. However, it should be noted that the settings for automatically obtaining IP and DNS are set by default in Windows 10, so you most likely will not have to use the above steps. However, if you have problems, use them.

Connection via static IP address

In addition to the DHCP connection, some providers provide their users with a connection using a static IP address. If you have such a connection, then in order to access the Internet, you will have to tinker a little with the settings.

If you have a connection via a static IP address, then the provider should have notified you about this and also provided the data to complete the connection. Connect the ISP cable to the Ethernet port of your motherboard. Then go to Network Connections→Configure adapter settings→Double click on the network connection→Properties→IP version 4 (TCP/IPv4) (or TCP/IPv6 protocol).

Check the boxes next to the options for manually setting the IP address and DNS and enter the addresses that your provider indicated to you (or find them in the contract). Save the network connection settings, after which access to the Internet will be open. As you can see, it's a little more complicated than with a DHCP connection, but still extremely simple.

Setting up a network connection with PPPoE

Some providers provide their clients with a network connection to access the Internet using the PPPoE protocol. In essence, this protocol is used for the user authorization system. If your provider uses this protocol, then he must have provided you with the necessary data to authorize the network. Sometimes they may be included in the connection agreement.

So, let's now figure out how to connect to the Internet through a PPPoE connection. You will need to do the following:

• Right-click on Start and select “Network Connections”;
• then click on “Network and Sharing Center”;
• then click on the option “Create and configure a new connection or network”;
• Left-click on “Internet Connection” and click “Next”;
• Having opened the next window, select “High-speed (with PPPoE)”.

A window will appear in front of you in which you will need to enter the authorization data issued by your provider. Once you have finished filling out the required fields, click on the “Connect” button. If you have entered the authorization data correctly, you will immediately have access to the Internet, which, however, can also be easily understood by the network connection icon in the notification panel.

There, by clicking on the network connection icon, you can find a special “Dialing” menu, with which you can carry out various manipulations: modify the settings of your connection, delete it, or connect again. As you can see, everything is quite simple if you have the necessary data from the provider.

Connecting to a wireless Wi-Fi network

Connecting to an already installed Wi-Fi wireless network is an incredibly simple task that can be completed in just a couple of clicks. If you have a router in your home that distributes a wireless network, then you can connect to it using any device that has a Wi-Fi adapter, whether built-in or external.

To connect to a Wi-Fi network, you need to do the following:

• activate the Wi-Fi adapter on your laptop/computer;
• click on the Wi-Fi signal icon in the notification panel;
• select the network connection of your Wi-Fi router;
• click on the “Connect” button and enter the password, if necessary;

You won't have to do anything else. As soon as you enter the password and connect to the Wi-Fi network, you will be able to access the Internet. To disconnect from the network, click on the connection in the list again and click the “Disconnect” button.

Setting up 3G/4G connection

If you prefer to use more mobile versions of Internet connections, then they can be easily set up on Windows 10. Let's see how to set up a 3G/4G modem. So, the very first thing you need to do is connect the purchased modem to your computer and install drivers for it. You can find the driver on the manufacturer’s official website or on the physical media included with the modem. In general, you can even just find it on the Internet.

Once you have completed installing the required driver, let's now move on to creating the connection. It is worth saying that it is created almost exactly the same way as a PPPoE connection. Do the following:

• right-click on Start and select “Network Connections”;
• then click “Network and Sharing Center”;
• then click on “Creating and setting up a new connection or network”;
• LMB select the “Internet Connection” item and click the “Next” button;
• select the connection type “Dial-up”;
• Enter the required data in the fields and click on the “Create” button;

After clicking the button, the network connection will be successfully created, and you will also have access to the Internet. However, the speed of your connection will depend solely on how good the quality of communication with your telecom operator is. But you probably already know about this. To make any additional settings in the created connection or disconnect from it, you need to click on the icon in the control panel.

Found a typo? Select the text and press Ctrl + Enter

Windows 10 is the latest operating system used on personal computers. It was developed by the famous Microsoft corporation. The system became the next after 8, skipping the number 9. It belongs to the Windows NT family and is the most popular in the world. The main problem for inexperienced Windows 10 users is setting up the Internet. In this material we will show everyone how to properly configure Windows 10 in order to safely “surf” the Internet.

How to turn on the Internet in Windows 10 - options

Let's look at the main options for how easily you can connect to the network via a computer.

There are several basic solutions to this problem:

• Setting up a regular connection Ethernet. To do this, you need to connect directly from your computer to your provider. This can be done via a computer, router or modem. We remind you that provider- a special company that allows a potential client to connect to all Internet services.
• Setting up a high-speed connection PPPoE.
• We connect to the network via Wi-Fi.
• Setting up the network via USB 3G/4G modems.

Automatically connecting to the Internet in Windows 10 is a process that should be carried out after completing one of the steps. So that the material does not cause you any difficulties, find out what kind of Internet you have and go to the desired part of the article. We’ll start with the most popular way to turn on the Internet on Windows 10 - Ethernet.

Connect to the Internet via a network cable, router or modem

This is the simplest type of connection and can be installed in a matter of minutes. It is very easy to start it again if you have done all the necessary steps correctly. If your ISP has installed a network in your home but hasn't given you the basic details to connect, then you're in luck, you're using an Ethernet system. The same steps need to be performed if you have a router or modem - connect the network cable to the PC. You need to find the hole that is responsible for the network card.

If the Internet settings have not undergone any changes, the network should appear immediately. In the future, you can pull out the cable and insert it again, and the Internet will auto-connect instantly. Now you need to understand what kind of connection you have, it may be limited, unidentified or not working. This is checked using the Ethernet parameters.

Next, we need to find the connection status, which is located on the notification panel. Open and go to the tab “ Network and Sharing Center", then change the adapter parameters (there is a similar tab there). You need to select Ethernet and view its properties.

We mark the item IP version 4 (TCP/IPv4), in other words, put a tick next to it. Next, you need to check the automatic configuration and click OK. After all the steps taken, the Internet should connect.

If this does not happen, there is another way - simply restart the computer and check that all connections are connected correctly before turning it on.

Setting up PPPoE in Windows 10

The provider who installed the network in your home gave you settings for accessing the Internet or Wi-Fi. In this situation, you need to set up a high-speed connection. This point is very similar to the previous one with one exception - the network works as long as we are connected to it. There are two options:

1. You have a router, which will make the task much easier. Connect the cable to the router and use the Internet.
2. Your cable is connected directly to the PC, you remember your network logins and passwords. In this case, you need to create the connection yourself.

Consider creating a connection yourself:

If everything is done according to the instructions, the network should appear and you will be able to use it after a couple of seconds. To make adjustments to the specified settings, you need to find the Internet icon in the Control Panel and open it.

Connect to the network via Wi-Fi

To complete this process, you definitely need a router with Wi-Fi connectivity. Also, this way you can connect to the network in a cafe or with friends. Windows 10 makes working with it much easier, because it almost always installs network drivers for the Wi-Fi adapter. If this happened to you, then you need to open the icon with a list of all possible networks and connect to any, it can be with or without a password.

Complications may arise if there are no drivers. Then the easiest way would be to ask a friend to download them and give them to you on a flash drive. To do this, you need to find out the model of the network adapter in advance. Unpack the archive with drivers, install, and you're done. The connections will automatically appear as in the picture above.

Setting up a network via 3G/4G modems

We start by connecting the modem to the PC itself and installing all the necessary drivers. Where can I get them from? Manufacturers' websites will help with this. You need to find out your modem model and download drivers from the Internet. The caveat is that to connect a 3G modem you need access to the network, so you should take care of this in advance. The exception is if the modem came with a disk on which the necessary drivers may be located.

Done, the connection should appear, the network is connected.

But in case of failure, you need to check all the modem connection settings. There is also a small chance that the provider provides very poor coverage. In this situation, there will either be no Internet at all or it will be very slow. To find out the status of your network, just look at the notification panel. There you can turn off the Internet or reconnect to a new network in a few clicks.

Video on the topic

A local network allows you to establish a connection between several computers in the same room, establishing shared access to files. As a result of setting up a home network, users have the opportunity to work on the same document or play games together on different computers.

Local network capabilities

Setting up a Windows 10 network allows you to get a number of convenient features that will be useful for users who have several computers at their disposal.

• Sharing files from different computers. Fast data transfer regardless of volume.
• Share a printer, scanner, or other network device.
• Setting up online games and entertainment.

These are the main directions, each of which contains a number of possibilities. For example, fast data transfer allows you to back up important information so that if one machine stops working properly, the information you need can still be accessed from another computer.

To start using all these functions, you first need to properly configure the local network in Windows 10. You can connect machines that have the same versions installed, a PC and a laptop with different versions of Windows - between “seven” and “ten” there are no compatibility restrictions.

Network creation

The first step is to set the same workgroup name on all computers that you are going to connect to the network. On Windows 10 and other versions this is done the same way:

• Click Win+R to call the window " Execute».
• Enter " sysdm.cpl" to open system properties.

• The “” tab will immediately appear. Look at the name of the working group. To put the same name on other computers, click " Change" Use only Latin letters!

The setup then continues in " Network and Sharing Center", which is launched through the control panel or the connection icon in the notification area. Next you should move on to changing additional parameters.

On Windows 10 you can still get here through the “ VPN" on the " tab Network and Internet» in system parameters.

Here you need to enable network discovery with automatic configuration, file and device sharing, and allow the system to manage homegroup connections.

Attention: Enable network discovery and passwordless sharing is required for all profiles! You'll set up your home or work profile first, then your general profile and all networks.

This operation must be repeated on all computers. As a result, local network participants should have:

• One workgroup name is assigned.
• Network discovery enabled.

If the home network into which the computers are connected is built on the basis of a single router, then the above steps are sufficient for the normal operation of the local network. If the computers are connected directly using a crossover cable or the DHCP service, which independently distributes IP addresses to machines, is disabled on the router, then additional configuration must be done.

• Open " Network Sharing Center", then go to the " Change adapter settings».

• Select the network card in which the crossover cable is installed and open its properties.

• Check " Use the following IP" And " Use the following DNS" Fill in the lines with the values ​​shown in the screenshot.

On the second computer you need to add the following data:

The IP address will be different on different computers. If on the first machine you wrote 192.168.0.2, then the second address will be 192.168.0.3 and so on, depending on the number of network participants. The rest of the data remains unchanged.

Enable sharing

The local network has been created, but in order to use programs and files from one computer that are stored on another machine, you must also set up shared access for them. Setting up a Windows 10 network This essentially ends there. Let's create a shared folder with documents:

• Right-click on the folder and open properties.
• Go to the " Access", click on the button " Advanced setup».

• Check the box " Share" Click on the button " Permissions».

• Set permissions. If you want to be able to only open the directory from another computer and view its contents, then check the box “ Reading" in column " Allow" To provide full access, check the appropriate box. Save the configuration by clicking " OK».

Then you need to return to the folder properties and go to the “ Safety" Here you should click the button " Change».

The window “ Group Permissions" Under the field " Groups or users» click « Add».

Enter your name " All" (no quotes needed), click " OK».

Set the same permissions that you did earlier when setting up access.

After allowing sharing, it is recommended that you restart your computer to Windows 10 network setup completed correctly. The next time you turn it on, the “ Net", which will display the computers between which the connection has been established.

Inside the directory under the name of the other computer, you will find folders that are configured for sharing.

Inside the folder will be the same documents that are stored on another computer. If you have given full access to the settings, you can easily edit them from another machine.

Sharing Internet access

If a local network is built without a router, using a direct wired connection of computers, and one machine has Internet access, but the other does not, then this can be quickly corrected. The described actions are performed on the computer that has a connection to the global network.

• Click the connection icon in the notification area. Open " Control center" and proceed to change adapter settings.

• In the list of available connections, find the WAN connection. Open its properties, right-click.

• On the " Access» Allow other members of your home network to use this Internet connection.

Now from one computer the Internet will be distributed to other participants in the network. This will affect the speed, but when accessed from different devices through the router, the speed is also divided in proportion to the load, so this is a common practice for sharing the Internet.