Setting up a Yota router: fine-tuning the Yota Wi-Fi router Yota Many New, Yota Share. How to enter the Yota modem settings by IP address: procedure and possible problems? 10.0 0.1 yota input

The Yota provider is one of the largest providers of wireless high-speed Internet services. To use the services of the Yota mobile operator, you must purchase a proprietary modem (router).

Many Yota subscribers, after purchasing a router, encounter problems setting it up. Let's find out how to go into the Yota router settings to set parameters and change the password.

How to set up a Yota router

All Yota mobile Wi-Fi routers, both old and new, can be configured using the IP address http://10.0.0.1 or http://status.yota.ru. To get to your Yota Personal Account, you need to enter this web interface address in any Internet browser and follow it. The admin settings panel will open, where you can change or set the default values, restoring the factory settings. The Yota device must be connected by a network cable to the computer, if such an interface is provided.

In principle, the new Yota Wi-Fi router does not need configuration and works out of the box. Having purchased a device in a store, you can immediately use the Internet and distribute it to any device. But fine tuning to suit your needs is also possible.

How to enter Yota settings on status.yota.ru and 10.0.0.1

1. Turn on the device by connecting it to a 220V power supply
2. Connect to your router or Internet center via Wi-Fi. To do this, you can use a smartphone, tablet or laptop. Find the wireless network “YOTA-xxxx” created by the device; the network name and password for access are indicated on the bottom panel.
3. Launch your internet browser and go to the configuration page - http://10.0.0.1. The default administrator password is admin.
4. When connecting for the first time, on the configuration page, enter a new name for the Wi-Fi network, select the encryption type and create a password on the “Device Setup” page.
5. After saving the settings, you will need to reconnect to the Wi-Fi network. In the future, you can change these settings yourself using the web interface at http://status.yota.ru.
6. Open your browser and enter www.yota.ru in the address bar and follow the instructions on the operator’s page, which will open automatically.

Managing Yota modem settings

To go to settings:

1. Insert the Yota modem into the computer's USB port
2. Wait for the LED indicator to turn on
3. Launch an Internet browser, go to the website http://start.yota.ru

Changing settings and checking the connection status are available at the IP address 10.0.0.1 and the web interface address status.yota.ru.

The status.yota.ru/advanced page allows you to change the DHCP range of the device and return to factory settings. Change the values ​​on this page only on the advice of a Yota Contact Center specialist.

Resetting the settings can be done using the reset button next to the SIM card slot. Briefly (within a few seconds) press the button with a thin object (a paper clip or a toothpick) to return to the default settings.

By logging into the Yota device administration panel, you can:

• Reset settings to factory settings
• Check and update software version
• Change Wi-Fi password
• Change password and access parameters in the admin panel
• Change the parameters for distributing IP addresses to connected devices

An example of setting up a Yota router via the web interface

We remind you once again that for a successful connection, the Yota device must be connected to the network connector of the computer with a cable. If the router does not have a network connector, it means it is configured via Wi-Fi. Below are examples for the Yota Internet center.

Resetting the Yota modem to factory settings:

The spread of mobile Internet began about three years ago. If you have decided to master this technology, then it’s time to get acquainted with Yota.

The Yota provider is one of the most popular and technologically advanced providers in the Russian Federation. It was only a matter of time before this company released its own mobile modems and routers.

The equipment they produce is part of one of the most advanced connectivity subfamilies, LTE. In addition, the device includes a cable for connecting to a PC or laptop, as well as instructions.

If the router does not respond when you first connect, then do not worry and call the service center; perhaps there is a battery somewhere in the box that needs to be installed under the cover. The router is mobile and does not require a constant connection to the power supply.

What is the Yota LTE network?

Today, mobile Internet is one of the most convenient and widespread ways to access the World Wide Web. Due to the lack of location, the ranks of users are growing every day, and many are already buying routers and modems that use such a connection. For example, modems from Yota.

Video: Connecting the YOTA modem to the 3G Wi Fi router HAME

When purchasing such a device, every new owner has a question regarding setup, and this question does not require delay, because all further work and communication on the Internet depends on it. So, where to start, how best to do it and what to pay attention to, all this in order.

Yota company cares about its customers and that is why their products have moved to a new level of operation - the LTE network. The LTE network implies a high-speed connection that operates at 178 megabits per second for reception and 58 megabits per second for upload, although its potential is much greater. During the general demonstration, the capabilities were raised to 326 and 172 Mbit/s, respectively.

In addition, Yota routers support work with 5 users simultaneously, as indicated in the summary of characteristics. But in fact, what was tested, it is capable of ensuring uninterrupted operation when connecting 6 users, which is not so important, but pleasant for owners of such equipment.

Working on such a network is very good for people who, due to the nature of their employment or communication, are forced to exchange file data rather than text messages.

Such a connection will avoid wasting time waiting.

Connecting the router to a PC

Connecting the router to a PC is possible in two ways.

The first involves a physical connection via a USB cord that comes with the device.

you follow T:

1. connect the router to the computer using a USB cable;
2. if the autorun function is inactive, then you should log into the router as if it were a physical medium, and then run the AutoInstall.exe file;
3. If the autorun function is active, then follow the instructions of the driver installer program.

The second option is possible when connecting to a laptop or PC that has a Wi-Fi card, “b” or “g” standard.

This will allow you to avoid unnecessary manipulations with wires and subsequent cluttering of the front panel of the system unit, for example. Most often, the network name is YOTARouterXXXXX, where “ХХХХХ” is the last digit of the equipment’s IP address.

Configuration via web management

Setting up a Yota mobile router via a web connection is possible if you have any available browser on your computer.

So:

After this, the main menu of the router will open in the window, which will be located on the left. A list of tabs for a particular section is located on the top panel. In addition, in the main part there will be basic information about the device, which you can use if necessary.

Wi-Fi setup

Configuring the router to work in a wireless network is done through the web interface or through the settings menu. This section will discuss setting up a YOTA 4G router via a web connection.

So, setting up a Wi-Fi connection is quite simple and is possible when you turn on the router and connect the device to it. You can connect either physically or via a wireless network; more detailed information about this is provided above, in the corresponding section.

Now you should move on to working directly in the device settings.

In order to set up a Wi-Fi network you need to:

Working on the Yota network settings for the router

If you connect the device to a PC or laptop physically, that is, via a cord, then you will be prompted to install drivers, as mentioned above.

At the same time, you will have the opportunity to configure the router not through a web connection, but through its direct settings.

To do this you need:

A direct router settings menu is much more useful for an inexperienced user than configuration via a web connection. Everything in the menu is intuitive; when working in it, you don’t have to worry about entering incorrect data and so on. More detailed settings are available only through the browser.

Further expansion of the settings, adding items about port forwarding and server settings, is available only after the first connection to the Internet.

At the same time, having connected to the Internet, the router will automatically update the firmware, which is very convenient for those who are not good at working with a PC or do not have the time and desire to do this.

Connecting the Yota 4G USB modem to the Internet

Accessing the Internet through a Yota router is quite simple and, unlike many other devices, you do not have to perform many unclear actions to do this. After installing the router, an automatic update will occur, the program will independently update the firmware and install drivers, which you know from the information above, but will also connect to the Internet.

The first time it is better to connect the router directly to the computer (physically). Then he will be able to make all the necessary settings.

In addition, there are situations when it is necessary to set a fixed IP address.

In order to do this, you can either use an additional device:

1. connect the router to another device if your PC does not access the Internet via mobile IP;
2. make a connection;
3. configure router IP.

How to do all this, see above in more detail.

Or configure the router via a web connection. You can read about how to do this in the relevant sections.

Yota routers are an excellent choice for those who are used to traveling, who are used to always being in touch with all their family, friends and relatives. In addition, the router should also be purchased by those who like to get the most for what they pay.

By purchasing this device, you will have access to the Internet almost anywhere, and setting up the equipment will not complicate your life. In addition, you don’t have to worry about the relevance of your device’s software, because it will do everything on its own when connected to the network.

Yota routers are a choice for those who are always on the move and do not want to waste time.

First of all, it’s worth noting that, as a rule, setup occurs automatically. When we insert a SIM card into the device for the first time, the operator immediately sends a message with access settings and phone them yourself sets. If this does not happen, then you should contact technical support to have a repeat SMS sent. However, everything can be done on one's own.

The setting is the same for all Android-based smartphones. Only the interface may differ from the screenshots shown. Let's go directly to the settings:

Setting up a Yota modem

Setting up a SIM card on your phone is easy. With a modem the situation is somewhat different - everything is even simpler here. Before moving on to the setup, it is worth noting that these instructions apply to all types of modems, no matter whether it has Wi-Fi or not.

The modem does not come with any additional installation disks, and there is also no special client to work with. All actions to track your balance, set up and change tariff plans happen in the browser. Even if there is no Internet connection, we can go to the router settings. Let's move on to the actual installation:

1. Connecting USB modem into any free computer port. It is worth noting that it is better to decide in advance which port will be used for this procedure, so as not to install drivers several times.
2. We wait driver installation. They will automatically load from the modem, after which also without human intervention will be established on computer.
3. We are waiting for the new network to appear in the control panel.
4. Opening any browser and enter any existing address in the address bar.
5. Us will transfer to a special page where you need to go through the procedure registration.
6. After registering, go to Personal Area using your username and password. In your personal account you can replenish account and choose the required Internet speed.
7. The basic setup is complete, you can use it.

For in-depth configuration, we need a browser line. We enter “http://status.yota.ru” into it, it also works ip address 10.0.0.1. Login and password are specified in manual user. As a rule, the default is admin And admin. It is better to change this combination as soon as possible.

In the menu that opens we can see everything characteristics modem, as well as the received signal. If you wish, you can change firmware, personalize options. However, it is worth noting that this should be done by professionals, since there is a high chance of violating one of the basic settings and losing the Internet.

To access the Internet it is not necessary to log into this web interface. Just for fun, you can take a look there and see characteristics network, but it is intended for more experienced users who know exactly what needs to be changed. Updates are happening automatically, so the average user may not go into the settings at all.

In case of problems the network is the first thing to do check whether the computer is within the network coverage area. If yes, then the second step is check Is the modem firmly plugged into the computer? If there are no external problems, then you need to contact technical support. Most often, they resolve issues remotely.

Regardless of the type of modem selected, Status.Yota.ru is used to configure the device. The operator is very popular due to low tariff prices and high-speed Internet provided to its customers. Currently offers two types of modems:

1. Simple;
2. Wi-Fi.

Using Status.Yota.ru

The site's interface is simple and easy to understand. However, before you start setting up, you need to make the correct connection. How to do it:

• Operator modems do not have special drivers, so first you just need to plug the device into the USB connector.
• If the connection is successful, the brand icon will light up:

• Wait for a notification on the screen that the modem is installed.

After this, it is ready to work, you should follow these steps:

• Log in to the browser you are using.
• Automatically).

• Click the “Continue” button.
• Enter your phone number in the field that opens.
• Enter the code received by SMS message in the web interface.
• Fill in the rest of the device user form.
• Click " ".

Additional features

On Status.Yota.ru, setting up the device won’t take much time either:

• To get to the site, you need to enter “status.yota.ru” in the web address field.

• Once on the Eta ru status start page, the client can see data about the Internet: current and maximum speed, quality, signal level, etc.

• Click the “Device Management” button.

• In the settings tab that opens, you can enable or disable the network you are using, change its name, password and type of protection.

In addition to the main page, there are also a number of addresses Yota ru status for advanced modem settings:

• /manualupdate - update the firmware version.
• /network - change network parameters.
• /dir - hidden settings.
• /advanced - in this section of Status.Yota.ru you can change the DHCP range; in total, three options are offered: 10.0.0.0, 192.168.0.0 and 172.16.0.0. You shouldn't do this unless absolutely necessary.

To go to these tabs, you need to type 10.0.0.1/ in the address bar and then enter the name of the desired item.

How to update the firmware version using the manualupdate command

Download custom firmware from users. It depends on the device model.

Go to manualupdate.

• In the window that opens, click “Browse”.
• Select the firmware file from your computer.

• Click "Update".
• After installation is complete, the device must be rebooted.

Often you can’t go to Status.Yota.ru right away, in which case you need to enter 10.0.0.1 in the address bar.

If this does not help, then the device needs to be rebooted and tried again.

The wireless provider Yota has come to us, in Saratov. The operator offers unlimited Internet access, and the terms of the tariffs are such that there is no limit at all, the tariffs differ only in access speed. In our area, currently, none of the competitors offers such conditions.
To access the Internet via a computer or laptop, Yota offers three models of modems, two of which have a wireless Wi-Fi module - Yota 4G LTE and Yota Many.
By the way, they work with any device that has a USB port due to the fact that they have their own operating system. That is, in fact, this is a small mobile router.

It can be used without connecting to a computer or laptop. That is, we simply plug it into the adapter (for example, a mobile phone charger of suitable current).

The only point is that you first need to configure WiFi on the Yota modem. This can be done through the device’s web interface, which is also called “Personal Account”, at: status.yota.ru. Enter it into the address bar of the browser and click the “OK” button.

If the browser complains with the error “Page not found” or “Cannot access the site,” then try entering the modem’s IP address in the address bar: 10.0.0.1 like this:

The default login is admin and password: admin. After authorization, you need to open the “Settings” menu item:

The default wireless SSID is YOTA. You can change it to your own option in the “Network name” line.
The security type is already set to the most reliable at the factory settings - WPA2.
In the “Password” field, enter your password for the Yota WiFi modem, which will be requested from clients when they try to connect to it.

On the latest firmware versions, it became possible to set the maximum number of Wi-Fi network clients:

This is done simply by moving the slider left or right.
Save the device settings.
Profit! The mobile mini-router is ready for use.

Note: On some models of Internet modems, Yota encountered a different IP - 10.0.0.254 .

As you can see in the screenshot, there is no difference in the user interface itself.

What to do if your personal account is unavailable?!

Most likely the problem is with the IP address. The computer cannot receive it automatically and therefore Login to Yota settings for 10.0.0.1 is not available. The fix is ​​simple. We open the Windows network connections and find the one through which the PC or laptop cannot access the Iota settings. Right-click on the connection and select “Properties”. In the window that appears, double-click on the item “Internet Protocol IP version 4 (TCP/IPv4)” to get into its parameters:

Here you need to check the “Use the following IP” checkbox and enter the following parameters:

IP address - 10.0.0.2 Mask - 255.255.255.0 Gateway - 10.0.0.1 DNS server - 10.0.0.1

As an alternative DNS, you can use a public server from Yandex - 77.88.8.8 or Google - 8.8.8.8.
Click on the “OK” button to apply the settings and try to log into the modem’s personal account again.
If after this you cannot enter the Yota modem settings, try plugging it into another USB port on your computer.
Didn't that help either? Then it makes sense to try taking it to a service center and give it for testing.