How to set up a universal remote control for your TV. Universal remote control for a TV How to set up a universal remote control for a sitronics TV

More and more electronic devices are appearing in our lives, without which we can no longer imagine life. One of them is the remote control. Due to their small size, they are often lost, and due to their fragility, they break (as a result of falling or water). And so that if you lose or break the original remote control for your TV, you don’t have to look for exactly the same one, you can take a universal one, suitable for most existing models.

From this article you will learn how to choose and how to properly use a universal remote control for televisions (TV).

The principle of operation of a universal TV remote control

This remote control works on the principles of capturing the signal of the device that needs to be controlled, recognizing it and using the built-in database of certain codes, gaining access to control a specific TV model.

Depending on how the universal TV remote control is configured, they are:

• programmable;
• trained.

And according to design they are divided into:

• similar to regular remote controls;
• universal remote control key fob – multi-brand model (suitable for 90% of TV brands).

Such remote controls differ not only in design, but also in functionality, since a small key fob can only perform basic functions: on/off, volume control, silent and AV modes, menu settings, channel switching, numbers and timer .

How to set up a universal TV remote control?

If you bought a trained remote control that already has built-in control programs, then you only need to enter the model of your TV on it and you can use it.

But, if you took a programmable one, then you need to act like this:

1. Turn on the TV
2. Press and hold the SETUP or Set button on the remote control until the red LED lights up continuously.
3. Point the remote control at the TV screen and press the Vol + button (i.e. increase the volume). It is correct when the indicator reacts (blinks) to each button press. With each press, the remote sends a signal to the TV to complete the task using a different code.
4. When the remote finds the code for your TV, a volume bar will appear on the screen. Press the SETUP (Set) button to memorize.

After this, you need to check whether the universal remote control can control your TV; if not, then the setup must be repeated.

There is another way to set up a universal TV remote control, but for this you will need an original remote control (which can sometimes be problematic).

The setup procedure is as follows:

1. Press the buttons on the universal remote control in a certain combination.
2. At the same time, you press the same buttons on the original remote control.
3. The universal remote control will remember the signal and will work the same way.

It's very easy to set up a multi-brand TV remote control. To program it, you just need to point the remote control at TV and press the mute button or any other button (switch channels or turn on/off). After the command begins to be executed (a scale appears on the screen), this means that the signal is captured and the button must be released.

The most important criterion for choosing a universal remote control is the availability of codes for your TV model.

They usually say that by purchasing a universal television (TV) remote control, all problems are solved and you can replace several remote controls at once. But very often, universal programmable remote controls for TVs “forget” everything over time and stop working. This usually happens with cheap Chinese-made remote controls. In this case, programming must be done again.

Remote controls have become a part of the lives of ordinary people. Now it is not only a device for changing television programs, but also a universal device for controlling any electronics. It's no secret that technology is penetrating life more and more. And today, complex microcircuits can be found not only in high-tech devices such as a computer or TV, but also ordinary household appliances are becoming more robotic.

On the shelves you can already find multicookers that can be controlled from a regular smartphone, or refrigerators that remotely regulate the temperature. Due to the fact that the number of remotely controlled devices in the home is rapidly growing, in order not to get confused in the variety of remote control devices, each user needs one remote control that will allow them to control any equipment with just a few buttons. Thanks to modern technologies, ordinary citizens already have the opportunity to purchase such a universal remote control device.

In addition to the need to control household appliances with one click, such a device has another important feature. It can replace a lost remote control for a simple TV. It is not always possible to find the original model, so an analogue remote control can always come to the rescue.

If you compare a universal remote control and a regular TV remote control, you will find that they are extremely similar in appearance. Often these two devices have the same shape and plastic body. The similar arrangement of buttons may lead you to believe that the remote control device is not intended to control anything other than a TV, but this is not the case.

This misconception is associated not only with the appearance of the device, but also with the poor technical knowledge of ordinary people. Many people find it incredibly difficult to connect and configure such a device with other devices. In fact, organizing simultaneous control of absolutely any devices that support remote control from one remote control is very, very simple. Now we will look at how this is done using the example of installing and configuring the coordination of a universal device and a simple TV.

How to set up a universal remote control on your TV manually.

First, you need to make sure whether this remote control model is suitable for your device. Often, users have problems with setup precisely because of this kind of problem. That is why, before purchasing a remote control, it makes sense to check the list of suitable models and familiarize yourself with the technical characteristics.

• The first step to setting up two devices is to check that both devices are working. You should check the presence of power elements on the remote control.
• Then you need to press and hold the OK button (in different variations there may be a SET button).
• Next, you should enter the code that corresponds to the model of your TV or other device.
• Then you need to use the TV button and make sure there is a connection.

If communication between both devices does not occur, you should repeat the steps, first checking the correctness of the digital combination and manufacturer. In different variations of the remote control, the algorithm may be slightly different. The connection method depends on the manufacturer of this model.

Here is another way to connect this device.

• Check the functionality of the devices and the presence of a power supply.
• Enable device setup mode. Typically, detailed instructions are supplied with the remote control. On most models, this is done by a combination of pressing the SET and POWER buttons.

Reference! Many devices support configuration from a smartphone or computer. There are also remote control models with a built-in display, which makes operation easier.

• You need to select a special button for the TV. In other words, when you press it, the remote control will switch to the TV control mode. Keep the selected button pressed until the indicator lights up.
• Enter the device code. All devices have a unique character sequence that allows the remote control to access them. After this, the user has access to the remote control for the TV. By repeating this simple algorithm, you can configure the rest of the equipment that supports remote control.

How to set up a universal remote control on your TV automatically

There is an alternative way to configure and connect. You need to use auto search To do this you need to take a few simple steps:

• Enable the necessary devices.
• Then successively press the OK (or SET for different device options) and Power buttons. The indicators should light up to let the user know that the remote control is selecting a code for the model of a specific TV.
• The next step is to release both buttons at the same time and press POWER. If everything is done correctly, a volume level indication should appear on the screen.
• The final step is to press the SET button twice in a row. The setup is complete and you can start using it.

Attention! Not all devices support this auto search. If the setup is unsuccessful, you may have a model without auto-search capabilities.

If you have problems with automatic settings, another method is presented below. Many models have the ability to quickly select.

To activate this method, you need to complete the following steps.

• First, turn on the devices and check their functionality.
• Press and hold the TV button until the LED indicating the power comes on.
• Then you need to hold the MUTE button until connected to the TV. Once connected, you can release the button.
• Then you need to check the switching of devices by controlling the TV from the connected remote control.

If none of the above algorithms allowed you to connect two devices, you can try connecting the remote control to the TV by manually selecting a code.

How to program a universal remote control on a TV.

The remote control is also notable for the fact that it is not only capable of replacing many similar devices that are designed to work with an individual device. But also the ability to remember permanent devices with which it works.

For this purpose, it has a special memory. It activates after pressing the SET and POWER buttons simultaneously. After the indicator lights up, you can select the button that will be responsible for this device (in our case, the TV.) After this, you should complete the setup by entering the individual code. Now the user has the opportunity to switch between devices. Which he wants to use with the remote control.

Attention! Capabilities may vary. You can find out more details about the recording algorithm for your device in the instructions.

The memory function allows you to avoid confusion in controlling devices with one remote control, which makes this device even more versatile.

TV codes for universal remote control

Each TV model has an individual set of characters. Thanks to it, you can establish a connection between the remote control and almost any device. The code is a sequence of 4 or 5 characters. Different manufacturers have different codes accordingly. You can find it out from the technical documentation that comes with the device itself. There is also a universal table with encodings of the most common models.

Reference! The individual code was made for the sake of safety and comfort, since it would not be very convenient if a TV in one apartment accidentally picked up signals and switched channels due to the remote control, which is located in a completely different room and is used for completely different purposes.

What is a universal TV remote control?

The universal remote control is a new and modern device that was created to make life easier for everyone who is faced with the possibility of remote control. It can work not only with a TV, but also with various modern devices that have digital content, such as smart refrigerators or air conditioners.

The remote control can also replace a regular TV remote control. In case of breakage or loss. Even in appearance, these devices are a regular remote control in a plastic case with a convenient button grid. The device works, like a regular television device, through infrared radiation, which sends encoded information from the emitter to the receiver on the terminal device. There, the code is subject to decoding and recognition of the command given from the transmitter. After receiving the command, the terminal device immediately executes the specified algorithm.

Typically, the remote control runs on simple AA or AAA batteries. The power lasts for quite a long time and the duration of operation on batteries alone depends on the frequency and nature of use of the device. The body is usually made of plastic to reduce the cost of production. Inside the remote control there is a board on which, in addition to power outputs, there are push-button sensors and a microcircuit that generates a code sequence for subsequent transmission to the emitter. It also contains a signal emission device in the form of an infrared lamp.

Advice! Those who are concerned about health should know that modern remote controls are absolutely safe. The infrared rays emitted by the device have too little power and cannot harm the human body.

There are many remote control models that differ not only in appearance, but also in functionality. Many devices are designed to control not only the TV, but also other technological innovations, such as a “smart” microwave, smart refrigerator or an improved multi-cooker. Some models are equipped with a digital display. This makes working with them much easier.

Advice! When replacing the battery, remember that many devices “forget” all settings when they lose power. To avoid this, remove the batteries one at a time.

The price category of such a remote control ranges from one to eighty-four thousand rubles. This is due not only to the functionality of the models, but also to reliability and quality. Do not be mistaken that this device is produced entirely in the east. There are also domestic models on the market from Beeline, which are not inferior to competitors in their price segment.

To control TV equipment from a distance, equipment manufacturers try to equip the device with a remote control. In some cases, you have to buy a universal TV remote control to perform such actions. What this device is and the differences from the original version is discussed further in the article.

In order for the Smart TV to receive high-quality images, you must use the digital television function. In most cases, a special receiver attachment is used to connect such equipment. In this case, the user has two devices for remote control at once.

Not many people like having an additional remote control, and therefore users try to get rid of the unnecessary old one so that it does not clutter up the space inside the room. For this purpose, you need to purchase a special universal remote control, which will replace two remote controls at once - to control the TV and the set-top box.

Despite the development of modern technologies, PU remains unchanged over the years. It may differ slightly in shape, but the design remains the same - electronic circuit, the presence of a large number of buttons and a plastic body with LEDs. Also, the equipment must include a power source - batteries.

The universal remote control has the same functionality as the standard version, but it will have to be configured in such a way that unnecessary remote controls remain unused.

Many users are interested in the question: “can any remote control become universal for all TVs?” The answer is simple - no, not any. Externally, the remote control units will be very similar, but the filling is slightly different for the universal sample.
Having purchased a universal remote control, you need to look for codes for the desired TV models and configure the remote control to manipulate several devices.

Top 3 best universal remotes

1. REXANT 38-0011.
2. Vivanco UR 2.
3. One For All URC 6810 TV Zapper

The difference between the original and universal remote control

If a set-top box is used in the house, for example, Tricolor TV or Dom RU, then the remote control for these equipment itself is useless without a corresponding pair - from the TV.

The operating principle of any remote control consists of three main actions:

1. When the user presses a certain key, the desired microcircuit is activated, and the electrical impulse is transmitted to the TV.
2. The signal is transmitted thanks to an LED, which receives a certain command and sends an impulse to the TV with which it is paired.
3. Every TV has a phototransistor. It receives an infrared signal from the control unit and converts it into an electrical impulse, which is sent to the control unit. As a result, the TV responds to the perfect command.

To control the TV from the remote control, a special communication method is used, which is called PCM. This principle is also called a pulse walking modulator.

The peculiarity of the equipment is that for each command from the remote control a three-digit code is assigned, for example:

• 000 – deactivate the TV;
• 001 – switch to the next channel;
• 010 – return to the previous channel;
• 011 – turn up the volume. 100 – reduce volume;
• 111 – activate TV equipment.

From this we can conclude that when you press the remote control key, the installed electronic circuit inside the control unit activates an infrared diode, which will work according to a certain pattern: "111" - ON, ON, ON.

The signal length will be interrupted in standard steps of a few milliseconds. When adjusting the volume, the code “011” is used. This means that the diode will perform three such actions at once, but with a certain delay: it will deactivate, turn off, and then turn on again.

You can find several types of remote controls in stores:

• original;
• universal;
• unoriginal.

Non-original and original control units are designed to control certain TV models. The difference between them is that the original version goes on sale along with a specific TV, and a non-original version is bought to replace a damaged or lost model.

A universal control panel, it can be programmed according to the instructions for a specific TV, it is suitable for different options. It is recommended to connect the equipment to the TV if the original control panel is lost or broken.

UPDUs vary in shape, color, size and design. The user will have the opportunity to choose depending on his preferences. A special program is built inside the equipment, consisting of several codes that match the signal of each TV device. To configure it correctly, you will need to know this code in advance.

How to set up a universal remote control

To activate the universal control unit, you need to power it by inserting the correct type of battery into the appropriate connector. Some remote controls do not come with batteries, and you will have to purchase them.
Helpful advice: It is advisable to purchase non-AAA batteries, rechargeable batteries that can be charged many times. This will save a lot of money. Together with the nutrient cell, they sell a special slot where they can be installed for recharging. To carry out the operation, you will need to connect the device to the electrical network at home.

As soon as the universal remote control is powered up, you can proceed to pairing with your Smart TV. On the remote control, you need to select the appropriate mode: TV, DVD or Audio(some models have other parameters).

You can watch the remote control settings in the video below, but for each specific case we will look at the settings manually and automatically.

To connect to a TV device you need to use the “TV” button. To activate, you need to hold down the key for about 3 seconds and wait until the indicator on the front control panel lights up.

Next, you should enter a specific code from the model of your TV equipment. To find out this parameter, you will need to study the operating instructions.
There are several ways to set up a universal remote control for your TV - manual and automatic.

Manually

As mentioned above, for each TV unit there is a specific pairing code, which is necessary for fine-tuning the universal control unit.

After its introduction, you need to perform a certain procedure.

Setting up a universal remote control for your TV:

1. For the Supra remote control, point the remote control directly at the TV and hold down the Power button, after which a window will appear where you will need to enter the code from the device. If the numbers are entered correctly, the LED will blink several times. At this point, you can release the Power key.
2. For the Huayu universal remote control, you need to hold down the Set and Power buttons at the same time. You must wait until the LED starts flashing. Next you will need to enter a 4-digit code. After the diode goes out, you must press the Set button.
3. For the universal Beeline PU, you should activate the “TV” button and simultaneously press Setup and C.

After installation is complete, the device will blink several times. This is a sign that the keys can be released. To check the functionality of the equipment, you need to increase the volume of the TV. It is important to note that if you do not enter the code within a certain time (60 seconds), then all settings will have to be done again.

Automatically

To configure the remote control in automatic mode, you need to press a combination of four nines on the remote control button panel without removing your finger from the “9” key. If everything is done correctly, the TV will be deactivated.

After this, automatic selection of channels will begin. The operation may take approximately 15 minutes. This option is used if the user does not have a code to configure the universal remote control.

How to set up a universal TV remote:

1. For the Supra remote control, you need to turn on the TV, point the remote control directly at it, and hold down the Power button for 6 seconds. The LED should light up. If the TV device responds to a decrease or increase in sound, then the setup in automatic mode was successful.
2. On the Huayu control panel, you need to hold down the Set button and immediately after it Power. It is important to do the operation correctly - the keys are not activated simultaneously, but with a short interval. After this, you can release the digs. Press Power again. Make sure that the volume level appears on the TV device screen. To exit the program, you will need to click the Set key several times.
3. There is a third setting option that can be used for universal remote controls. The television receiver, as in previous cases, should be turned on. Next, press the “TV” button and hold it until the LED starts to light (on some models it may start blinking). Hold down the Mute button to start searching. At the end of the process, you need to activate any key of the universal control panel and make sure that the TV unit responds to commands.

Universal remote control codes

To set up a universal control unit, you need to know a specific number from a specific brand of TV device. Codes for universal TV remote controls are written in the device data sheet. Information is also available on the manufacturer's official website. There is a table of codes with the correct meanings.

It doesn’t matter what kind of TV the remote control is from (Samsung, Philips, Toshiba, Panasonic or other popular brands), you won’t be able to set up the equipment without the appropriate code. Therefore, before purchasing, it is advisable to find out all the available information about the TV and the control unit.
Using a universal remote control is easy - point at the TV and press the desired key. Everything is the same as with a standard remote control.

For one reason or another, a complete remote control may not satisfy user needs: for example, an out-of-the-box accessory is not always convenient for web surfing on Smart TV or has a short range. Also, the remote control may fail and even get lost.

Having purchased a new device, the user must synchronize the device with the TV. Next we will tell you how to link a new remote control to a Samsung TV.

The article will also discuss the use of iPhone and Android smartphones as a means of remote control of a television device.

To connect to a TV and set up a universal remote control you will need:

1. Activate TB using the buttons located on the side panel.
2. Disconnect devices in the vicinity of the TV that may also be compatible with your existing remote control.
3. Install batteries of the required format into the remote control housing and point the device towards the television display.
4. Press and hold the TV power button located on the accessory.
5. Wait for the automatic pairing of devices to complete. During this process, the user must hold down the previously pressed button.

When synchronization is completed and the TV reboots on its own, a notification indicating that the setup is complete will appear on the screen.

It is important that the user must release the pressed key only after the system message appears. The connection process will take no more than 15 seconds, then the remote control will be ready for use.
It is recommended to study the operating instructions supplied with the new remote control - this document may contain information about the hidden capabilities of the accessory that will be useful in controlling the “smart” functions of the television device.
It is worth noting that branded Samsung remotes are capable of connecting to the TV automatically after installing batteries - the user does not have to press any keys or turn off the electronics located next to the monitor.

You can find the original remote control on the Internet by the code number of the accessory model or the “serial number” of the TV device.

Connecting a branded Smart Touch Control

Smart Touch Control is a remote control equipped with a touch panel and a microphone. Thanks to the branded accessory, the user can simplify navigation through the “smart” menu and the process of searching for information on the Internet.

Synchronizing Smart Touch Control with your TV looks like this:

1. Installing two AA batteries into the accessory body.
2. Turn on the TV by pressing the “Power” button located on the remote control.
3. Press and hold the Back and Play keys for a few seconds.
4. An indicator of the device pairing process will appear on the TV - the user just needs to wait until the connection is complete.

In some cases, to successfully synchronize devices, you may need to restart the TV. It is important to note that the process of connecting the Smart Touch Control may differ from the presented algorithm - the exact sequence of actions depends on the series of the television device.

Below are the main differences between the touch remote control and the classic one:

• STC can only sync with one device;
• The remote control is supported only by those models of television sets that come with a similar accessory;
• For the remote control to work, special device settings are required.

Externally, ST Control differs from a regular Samsung remote control with touch-sensitive menu navigation keys and a physical button for launching voice search. You can find more detailed information about the branded accessory on the manufacturer’s official website.

Using a smartphone as a remote control

A modern smartphone can be used as a remote control: using a tethered gadget, you can not only control watching television, but also comfortably type text on a QWERTY keyboard while surfing the web.

You can link your phone to the TV using:

• WiFi;
• Infrared port;
• Bluetooth.

Regardless of the selected connection interface, the user will need to download a special application from the App Store or Google Play.

The process of synchronizing a smartphone with a TV is shown using the example of the free Samsung Remote utility:

1. Connecting a TV device to your home router. The owner of a Smart TV can use both WiFi technology and a wired LAN connection.
2. Download the utility from the official application store.
3. Launch the program and accept the terms of the user agreement.
4. Start searching for available devices. In the list of devices that appears, you will need to select the desired TV by clicking on the corresponding part of the smartphone display.
5. Entering the password automatically generated by the TV on your smartphone. The code will only need to be entered the first time the devices are connected to each other.

Sometimes the user also needs to go to the TV’s “Settings” menu and agree to pair the TV with a mobile device.

The algorithm for synchronizing devices via infrared or Bluetooth is no different from the connection process via WiFi. It should be noted that in the case of an iPhone, you can only use the WiFi interface for remote control.

Conclusion

The viewer can control the TV using several devices simultaneously: connecting a smartphone or Smart Touch Control to the TV does not interfere with the use of the “classic” remote control.

It is also worth noting that to simply switch TV programs, an ordinary “lazy one” will be enough - in this case, there is no point in spending money on an accessory with a touch panel.

TV remote control- a device that is used daily. Not surprisingly, the lifespan of the remote control may be too short. But what to do if it breaks? This is where a universal remote control comes to the rescue. Setting it up won't take much time or effort.

First, you need to figure out which model of universal remote control is suitable for your TV. As a rule, most remote controls are suitable, but their operation may be slightly incorrect. That is, some buttons may not perform their function, for example, the volume button can switch channels, and the TV turn off button can mute the sound. But in any case, this will be more convenient than going to the TV and changing channels manually.

How to set up a TV remote control

There are quite a few ways to set up a universal remote control for a TV; it’s impossible to write about them all. Let's look at the most common ones:

Quick setup of the TV remote control;
Setup according to instructions;
Vendor setup.

Quick setup- this is the easiest way. With this method, the remote control must have inscriptions from the manufacturer of your equipment. We turn off all electronic equipment that has remote control from the network, except for the one being configured. Turn on TV, on the universal remote control press the appropriate button (TV brand) and hold. You need to hold the button until the TV shows any sign. It can turn off, switch to another mode, turn off the sound, add sound, etc. It is at this moment that the setting button must be released. It may not work the first time, since the interval is very short. The universal remote control is configured.

Second way more complex. The universal remote control comes with setup instructions. That's what you'll need. The remote control setup book will provide codes for setup. Find the make and model of your TV there. Several codes can be used for one TV model, so if the first one doesn’t work, don’t be upset.
Next, turn on the TV, point the universal remote control at it and press two buttons- “SET” (or “TV”) and on/off. TV. We dial the code for your TV, the light on the remote control should go out. The setup is complete.

Third way simplest. If you buy a universal TV remote control in electronics hypermarkets, you can ask the seller to set it up right away. To do this, do not forget to write down the model of your TV on a piece of paper or take a photo.

Where to buy a TV remote control

The sale of TV remote controls is organized both in electronics hypermarkets and on the Internet. Also, the remote control can be purchased at the official service centers of the manufacturer of your equipment. And of course, you can buy a universal remote control in China -.

DVB-T2 universal remote control

Quite recently, a universal remote control for DVB-T2 set-top boxes appeared on sale - HUAYU DVB-T2. This model is compatible with 95% of receivers for receiving digital terrestrial television sold in the Russian Federation. The remote control is configured either automatically or by entering the required code.

The HUAYU DVB-T2 universal remote control has an affordable price. The package includes the HUAYU DVB-T2 universal remote control itself, instructions with codes.

Partial list of compatible devices: D-color DC711HD, D-Color DC1001HD, D-Color DC901HD, D-Color DC910HD, D-Color DC921HD, D-Color DC1201HD, D-Color DC1301HD, D-Color DC1302HD, D-Color DC1401HD, DELTA Systems DS-100HD, Kaskad VA-2102HD, Selenga T2-1000, Goldstar GS8833HD, Ross & Moor RMR-818T2 HD, Huba HB-9816, Globo GL60, Globo E-RCU-018, Hyundai H-DVB0 3T2, ICONBIT HDR21DVD, SUPRA SDT -92, Telant, World Vision T34, EVO-01NEW, Golden Media Mania 3 HD, Lumax DVT2-4110HD, Mystery MMP-70DT2, MYSTERY MMP-80DT, MMP-75DT2, MMP-85DT2, Openbox T2-02 HD, Prology DVT -100, Zala 1, Rainbow (world vision) s517ir, BBK RC-STB100, GoldMaster T-707HD, Oriel 810, Sharp GB0 12WJSA, Sharp GB0 13WJSA, SkyTech 57 G, World Vision T40, BBK RC-SMP712, Energy EVO- 1, General Satellite TE-8714, Lans DTR-100, Oriel 790, Lumax DV-2500CA, SELENGA T90, HD900, HD910, Hyundai DVB01T2, Oriel 710, Oriel ver.5, Rostelecom SML-292 HD, Divisat DVS HD-600T2 , Polar DT-1002, Oriel ver. 10, MTS WS-28A, Kaskad DVBT-2, REXANT RX-511, Rolsen RDB-502, Globo GL50, Rexant GL50, AirTone DB 2206, Home BY-628 DVB, TVjet RE820HDT2, TVjet RE820HDT2 option 2 POWER+GOTO, SIGNAL HD-200, HD-100 - POWER + 4, SELENGA T90, HD900, HD910, HD920 - POWER + FAV, D-COLOR DC1002HD MINI POWER+SUB-T, CADENA ST-203AF POWER+1, BOOOX T2 UNIVERSAL POWER+1 , REFLECT DIGITAL, COMPACT POWER.